1. 3M United States
  2. All 3M Products
  3. Data Center
  4. Wire & Cable
  5. Splices
  6. Medium Voltage Splices (1 kV - 46 kV)
  7. 3M™ Molded Rubber QS-II Cable Splice Kits 5411R/5412R Series

3M™ Molded Rubber QS-II Cable Splice Kits 5411R/5412R Series

  • 1-piece inline splice is perfect to repair damaged JCN or CN cables up to 6 inches
  • Excellent electrical stress distribution
  • Molded from specially formulated, peroxide-cured EPDM rubbers
  • Rated for 15 kV cables
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
All Options
Close
Specifications
Attribute Name
Value
Brand
3M™
Cable Shielding
Concentric Neutral (CN), Jacketed Concentric Neutral (JCN)
Case Quantity
1
Connector Included
CIR-1/0, CIR-1/0 and two 10002, CIR-2, CIR-2/0, CIR-21, CIR-22, CIR-3/0, CIR-4/0, None
Insulation O.D. Range
0.637 - 0.900 Inch, 0.870 -1.055 Inch
Insulation Outer Diameter (Imperial)
0.63 in, 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in, 0.79 in, 0.8 in, 0.81 in, 0.82 in, 0.83 in, 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in
Insulation Outer Diameter (Metric)
16 mm, 16.256 mm, 16.51 mm, 16.764 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm, 18.034 mm, 18.288 mm, 18.542 mm, 18.796 mm, 19.05 mm, 19.304 mm, 19.558 mm, 19.812 mm, 20.066 mm, 20.32 mm, 20.574 mm, 20.828 mm, 21.082 mm, 21.336 mm, 21.59 mm, 21.844 mm, 22.098 mm, 22.352 mm, 22.606 mm, 22.86 mm, 23.114 mm, 23.368 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm, 26.924 mm
Insulation Outside Diameter Range
0.637 - 0.900 Inch, 0.870 - 1.055 Inch
Insulation Outside Diameter Range (Metric)
16.3 - 22.9 mm, 22.1 - 26.9 mm
Manufacturing Origin
USA
Maximum Solid Conductor Size
1 AWG, 1/0 AWG, 2 AWG
Maximum Stranded Conductor Size
1/0 AWG, 2 AWG, 2/0 AWG (220 mil), 3/0 AWG, 4 AWG (220 mil only), 4/0 AWG
Number of Conductors
1
Operating Voltage
15 kV
Product Type
Inline Repair
Splice Type
Inline Repair
Voltage
25/28 kV
Details
  • 1-piece inline splice is perfect to repair damaged JCN or CN cables up to 6 inches
  • Excellent electrical stress distribution
  • Molded from specially formulated, peroxide-cured EPDM rubbers
  • Rated for 15 kV cables
  • Factory-tested to offer reliability
  • Meets the requirements of IEEE 404 standards

3M™ 5411R Series Molded Rubber QS II Splice Kit is a 15kV 1 piece inline splice perfect to repair damaged cables. It is suitable to use on 15kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables with copper or aluminum conductors. Its elongated design ensures the easy removal of damaged cables up to 6 inches.

3M™ 5411R Series QS II Splice Kit includes an EPDM molded rubber splice body, a packet of silicone grease and an instruction sheet. It replaces up to 6 inches of damaged cable, thereby eliminating the need to splice in a new section of cable with 2 separate splices. It is suitable to use on cables that can withstand a maximum temperature of 90 °C. The splice is molded from specially formulated, peroxide cured EPDM rubbers to provide physical protection. Connectors bridge the gap where the damaged cable is removed. The kit meets the requirements of IEEE 404 standards.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.