1. All 3M Products

3M™ Marine Adhesive Sealant 5200 Tan, PN06501, 1/10 Gallon Cartridge, 12 Per case

3M ID 626501523093M Product Number 5200UPC 00051135065013
  • Permanent bonding – above and below the waterline
  • Industry standard for over 50 years
  • Offers extended working time
  • Achieves handling strength in 48 hours
 More...
Specifications
Attribute Name
Value
Adhesive Type
Polyurethane
Brand
3M™
Industries
Marine
Product Form
Cartridge
Substrate 1
ABS, Acrylic, Aluminum, Cold Rolled Steel, Concrete, Gel Coat, Green FRP, Painted Surface, Polycarbonate, Polypropylene, Powder Coated Metal, PVC, Stainless Steel, Wood
Substrate 2
ABS, Acrylic, Aluminum, Cold Rolled Steel, Concrete, Gel Coat, Green FRP, Painted Surface, Polycarbonate, Polypropylene, Powder Coated Metal, PVC, Stainless Steel, Wood
Details
  • Permanent bonding – above and below the waterline
  • Industry standard for over 50 years
  • Offers extended working time
  • Achieves handling strength in 48 hours
  • Tough and flexible polyurethane polymer forms strong bonds
  • Capable of retaining strong bonds during vibration, swelling, shrinking or shock

3M™ Marine Adhesive Sealant 5200 is a one-component, high-strength, moisture-curing, gap-filling polyurethane for permanent bonding of wood, gelcoat and fiberglass. It cures to form a firm, rubbery, waterproof seal on joints and boat hardware, above and below the waterline. This product has been trusted throughout the marine industry for over 50 years.

3M™ Marine Adhesive Sealant 5200 offers permanent adhesion to wood, gelcoat and fiberglass.
Available in many colors to meet aesthetic needs
Tough and Flexible to Form Strong Bonds
Forming watertight seals, 3M™ Marine Adhesive Sealant 5200 (PDF, 35.41 Kb) offers permanent adhesion to wood, gelcoat and fiberglass. In addition, our marine adhesive sealant is flexible and allows for structural movement and dissipation of stress that may be caused by vibration, swelling, shrinking or shock. Available in both cartridge and sausage packs to meet your application requirements.

Recommended Applications
  • Fiberglass deck to hull
  • Through hull fittings
  • Wood to fiberglass
  • Portholes and deck fittings
  • Motors on fiberglass transoms
  • Under moldings
  • Hull seams above and below water line
  • Deck housing

Combats Vibrations, Swelling, Shrinking and Shock
3M™ Marine Adhesive Sealant 5200 is designed to meet the high demands of the marine environment, making it ideal for creating tough bonds resistant to saltwater and weathering. We formulated our sealant to provide an exceptionally strong solution for marine conditions as well as flexibility that combats vibrations, swelling, shrinking or shock. Once again, despite the barriers of a rough marine environment, 3M looked to science to provide a reliable, durable solution.

ALT
3M Manual Applicator
Designed to Endure Marine Environments
3M™ Marine Adhesive Sealant 5200 (PDF, 6.73 Mb) is a part of our broad range of adhesive sealants uniquely formulated for the marine market. Designed for reliable performance, 3M Marine Adhesive Sealant 5200 is the most trusted sealant in the industry for permanent, high strength bonding.

3M™ Marine Adhesive Sealant 5200 is a part of our broad range of adhesive sealants uniquely formulated for the marine market.
Choose a 3M Pneumatic Applicator for ergonomic applications
Understanding Polyurethane Sealants
Polyurethane sealants provide strong, flexible durable elastomeric bonds that seal against the elements. These sealants excel in challenging industrial, transportation and construction applications. Polyurethane sealants are available in a wide variety of Shore A hardness, open time and colors to meet many application needs. Choose a 3M Manual or Pneumatic Applicator for dispensing 3M adhesives sealant cartridges and 400ml/600ml sausage packs.

Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

Click here for more information on 3M™ Adhesive Sealants. (PDF, 797.43 Kb)



Customer Reviews
3M™ Marine Adhesive Sealant 5200 Tan, PN06501, 1/10 Gallon Cartridge, 12 Per case is rated 4.4 out of 5 by 10.
Rated 3 out of 5 by from Slow Cure Under Low Humidity Delayed Project I purchased a 10-ounce tube of 5200 Marine Adhesive to seal the gap between a stainless steel pipe fitting attached to a through-hole on a galvanized container and a layer of fiberglass separated by an insulating layer of polystyrene foam. After considerable research, I chose the 5200 Marine Adhesive because it was one of the few that would withstand continuous exposure to water. The instructions stated that it would become tacky after 24 hours and cure completely in five days. Well, seven days later and the sealant was barely tacky and far from cured. I checked the manufacture date on the tube and found that it was only 3 months old. Next, I called the 3M helpline and soon determined that because it had been one of those typical southern California summer weeks where the temperature in the workshop hovered in the mid-nineties and relative humidity was less than 20%, there hadn't been sufficient moisture to effect a complete cure. I spritzed it with a bit of water and checked back the next day - sure enough, it seemed to be setting up somewhat. However, I'd already lost a week waiting for the sealant to solidify and couldn't wait around for another week, so I decided to encase everything using additional fiberglass with a short length of pipe to decouple the inner and outer layers. Fingers crossed, I hope this works.
Date published: 2018-09-26
Rated 5 out of 5 by from Great sealant for pond and submersible pumps I sealed the gaskets between thick epdm liner and skimmer and overflow unit of my pond with 5200, perfecto ! Additionally, I sealed the internal and external gasket of a (supposedly) submersible pumpS that let introduce small amount of water into it (and destroyed the motor after some time). 5200 (you need to be patient) is the best adhesive tested, regarding other glues. And because it has some flexibility, it's better than epoxy in case of vibrations. And the seal is kept OK even in the winter (Quebec = -30 celsius), embedded in strong ice.
Date published: 2018-09-22
Rated 5 out of 5 by from Literally the best sealant I've used 5200 for a number of applications, the most critical of which was for the installation of two large brass port hole windows on a house. This was in an area that is bordered by the ocean on one side and the bay on the other. The windows were mounted with 21 lag bolts and flashed/sealed with 5200. Created an absolutely water and wind proof seal as well as adding some additional structural strength. Yes, it's pricey but it's also necessary when dealing with critical installations.
Date published: 2018-07-23
Rated 5 out of 5 by from No-brainer for inflatable boat repair Tried this after reading some great reviews in various dingy forums re: transom repairs, specifically reattaching the PVC flooring where it meets the transom. PVC giue won’t stick to wood, but hypalon glue will, yadda yadda yadda. Tried it, didn’t work like previous PVC repairs. Enter the 5200. Not only did it stick the PVC fabric to the wood but it held like iron, and I have enjoyed many many hours in a boat that was destined for the nearest dumpster box.
Date published: 2018-04-09
Rated 5 out of 5 by from Repaired vinyl pool liner In spite of the fact that the specs do not indicate its use for vinyl, I used this two years ago to apply a large patch/repair to my vinyl pool liner. The hole in the liner that was originally cut to accommodate the water supply/return from the pump had become significantly stretched to the point the original seals were not effective. I wanted to apply new material to both sides of the liner and I needed a bonding agent that was not a "fast setting". Using flexible, heavy gauge vinyl I cut and applied patches to both sides of the liner using generous amounts of 5200 on both sides. I allowed two days for the sealant to set before cutting a new hole through the patch. It worked perfectly and has continued to hold for two years.
Date published: 2018-03-01
Rated 5 out of 5 by from Great product Greatest thing since sliced bread ! Used this on boats maybe 30 yrs. Put a soapstone sink together with this product after 20 yrs still no leaks ! You may want to let people know that mineral spirits is good for spreading and clean up.
Date published: 2018-01-31
Rated 1 out of 5 by from Poor result after one season I used 5200 to seal 3 glass prisms to their stainless steel frames and then to the deck two began to leak the first season the third leaked the second season. The solution was to dig out the sealer and use a different product, very disappointing.
Date published: 2017-10-07
Rated 5 out of 5 by from Bonding wood to shiny metal surface Bought this glue to bond wood to a shiny metal magnet. Worked like a charm. Just a dab will do it.
Date published: 2017-05-08
  • y_2019, m_6, d_18, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_62650152309|3m-country-catalog|FUZEexperience|en_US, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_3m-country-catalog
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 2ms
  • REVIEWS, PRODUCT
Large Volume Order

If you are considering a large purchase of this or other 3M Industrial Adhesives and Tape products, our inside sales team is ready to help by providing additional information and options. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we'll do our best to prove that we should be your supplier of choice.


All fields are required unless indicated optional

  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

  • Submit