- Microporous hollow fiber membrane in hydrodynamically optimized contactor designs that enable rapid and efficient gas transfer performance
- Capable of achieving very low dissolved gas levels down to 1 ppb O2 and 0.5 ppm CO2 at outlet with proper system design
- Membrane contactors operate without using chemicals, which could help reduce chemical use in some plant operations requiring dissolved gas control
- Array of product options with various materials of construction available
- Compact, in-line operation with low pressure drop. May help save space, improve productivity, and decrease the number of required pumps
- Broad product portfolio with wide range of flow capacities to meet multiple scales of operation
- Includes membrane contactors designed to handle high liquid pressures - up to 300 psi (20 bar) pressure - and hot water sanitization
Our 3M™ Liqui-Cel™ EXF Series Membrane Contactors transfer gases to and from compatible liquid streams. These membrane contactors utilize a microporous hollow fiber membrane inside a device designed to enhance flow dynamics and take full advantage of the large membrane surface area for stripping dissolved gases. With proper system design, ultra-low levels of dissolved gas can be achieved.
Learn about 3M™ Liqui-Cel™ for Beverages
- Deoxygenating boiler feed water
- CO2 removal to reduce anion and mixed bed regeneration cycle frequency and to help improve water quality and efficiency of electrodeionization systems
- Deoxygenation of beverage product water to help protect product from oxidation and may extend shelf life
- Carbonation and nitrogenation in beverage production processes to add the right amount of “Fizz” to improve sparkle, taste and texture
- O2/CO2 removal in ultra-pure water processes to help improve yields and water quality
- Degassing point of use rinsing water and other compatible process solutions in wet bench processes
(PDF, 1.33 Mb)
Learn more about 3M™ Liqui-Cel™ for Power and Steam Generation
(PDF, 2.18 Mb)
About 3M™ Liqui-Cel™ Membrane Contactors
3M™ Liqui-Cel™ Membrane Contactors provide efficient dissolved gas control in a compact design. Capable of adding gases to or removing dissolved gases from compatible liquid streams, these gas transfer devices utilize hollow fiber membrane technology that may help facilities around the world improve operating efficiency, performance and protect product quality.
The presence of dissolved gases, such as oxygen, carbon dioxide, nitrogen and other non-condensable gases can cause a number of difficulties. Process interruptions, yield loss, corrosion, surface defects, unreliable measurement readings, poor product quality, higher operating costs and equipment inefficiency are a few examples of challenges faced by various industries when dissolved gases and air bubbles are not consistently controlled.
The 3M™ Liqui-Cel™ Membrane Contactor product offering includes products made with various materials of construction and a wide-range of flow capacities to meet process and application requirements. Their modular nature makes them easy to incorporate into systems with lower weight and less space than other conventional technologies, such as vacuum towers or forced draft deaerators. 3M™ Liqui-Cel™ Membrane Contactors do not require chemicals in operation and can be an effective alternative to chemical treatment options, such as oxygen scavengers in boiler feedwater or caustic/acid in reverse osmosis (RO) and other deionization systems. This may be particularly advantageous for facilities that want to reduce on-site chemical use as part of their sustainability goals.
How 3M™ Liqui-Cel™ Membrane Contactors Membrane Contactors Work
3M™ Liqui-Cel™ Membrane Contactors utilize microporous or non-porous, semi permeable hollow fiber membrane that is placed inside a contactor housing. In our EXF, SP, and MM-0.5x1 and MM-0.75x1 series membrane contactors, liquid flows around the outside of the hollow fiber membrane while a vacuum and/or sweep gas is applied to the inside of the hollow fiber during operation. In our other MM series membrane contactors liquid and gas flows are opposite: liquid flows inside of the hollow fiber membrane while a vacuum and/or sweep gas is applied to the outside of the hollow fiber.
Applying a vacuum or sweep gas creates a difference in the gas concentration levels between the inside (lumenside) and outside (shellside) of the hollow fiber membrane. This concentration difference is what drives rapid and efficient dissolved gas transfer.