1. All 3M Products

3M™ Hookit™ Abrasive Disc Pad

Products
  • Hookit™ attachment system enables easy disc change-out, maximizing abrasive disc life
  • Tapered edges from 15 degrees to 45 degrees make it easy to sand on flat or contoured surfaces
  • Choose pads designed for 1,500 to 12,000 maximum rpms for a variety of uses
  • Medium density foam construction provides support and flexibility for finer finishing and longer pad life
 More...
Size
Diameter
Thread Size
Number of Holes
Products Available
Available options:
 Size, Diameter, Thread Size and Number of Holes
All Options
Close
Specifications
Attribute Name
Value
Brand
Hookit™
Case Quantity
10 Cartons per Case, 5 Sleeves per Case
Center Hole Diameter
3 in
Color
Yellow
Consumer Label
No
Density Rating
Medium
Diameter
150 mm, 6 in, 8 in
Diameter (Metric)
15.24 Centimeter, 20.32 Centimeter
Max OPM
0, 10000, 12000
Max RPM
12000, 1500, 3000
Number of Holes
0, 5, 6
Number per Inner
1 per Carton, 1 per Sleeve
Product Type
Back-up Pad
Sanding Method
Hand
Shape
15 Degree, 45 Degree
Size
8 Inch
Surface
Clear Coat
Thread Size
5 Bolt Holes, 5/16-24 EXT, 5/8-11 INT, 6 Bolt Holes, M8-1.25 EXT
Vacuum Support
No
Wet or Dry
Dry
Details
  • Hookit™ attachment system enables easy disc change-out, maximizing abrasive disc life
  • Tapered edges from 15 degrees to 45 degrees make it easy to sand on flat or contoured surfaces
  • Choose pads designed for 1,500 to 12,000 maximum rpms for a variety of uses
  • Medium density foam construction provides support and flexibility for finer finishing and longer pad life
  • Disc pads designed to save time and money on specific auto body projects

We designed our Hookit™ Abrasive Disc Pads to bring new levels of efficiency and performance to a broad range of auto body projects. Specific pads are tapered for sanding projects on flat surfaces or contours, low speed or high. Disc pads feature our Hookit™ attachment system for use with a range of Hookit™ abrasive discs, affording quick change-outs and longer life of disc pads and discs.

3M™ Hookit™ Abrasive Disc Pad
Available in dust-free
pads with holes



Also available in
pads without holes



Hookit™ attachment system
enables easy disc change-outs
We designed our Hookit™ Abrasive Disc Pads to bring new levels of efficiency and performance to a broad range of auto body projects. Specific pads are tapered for sanding projects on flat surfaces or contours, low speed or high. Disc pads feature our Hookit™ attachment system for use with a range of Hookit™ abrasive discs, affording quick change-outs and longer life of disc pads and discs.

Improved Sanding for a Broad Range of Projects
You'll find a Hookit™ Abrasive Disc Pad for a broad range of auto body projects including shaping plastic filler, paint stripping, primer sanding and low-speed polishing or grinding. Medium density foam bodies provide support for 3M™ Abrasive Disc Pads (sold separately), yet also provide some flex for good conformability. Discs are available in standard or low profile, and tapered edges range from 15 degrees to 45 degrees, good for flat sanding or for contoured edges, low-speed polishing and featheredging.

Specific Hookit™ Abrasive Disc Pads fit a range of sanding equipment including Chicago Pneumatic® 777 sanders, National Detroit® 900 and Dynabrade® Model 57700 sanders or standard (5/8" shaft) slow-speed polishers. Choose back-up pads designed for use at maximum rpms from 1,500 to 12,000.

About Our Hookit Attachment System
The Hookit™ hook-and-loop feature makes disc attachment, removal, and re-attachment clean and easy, and facilitates use and re-use of the disc for the full extent of its abrasive life. Hookit™ disc pads have J-shaped hooks of the type most commonly used in everyday hook-and-loop applications. Hookit™ disc pads grip the brushed nylon loop backings of 3M™ Hookit™ discs and provide a finer finish than do adhesive backed discs. The Hookit™ system is designed for work spaces and applications where adhesive backed discs may become contaminated by dust, dirt, or flying debris.

Better Ways to Sand from 3M
Our Hookit™ Abrasive Disc Pad showcases many of our technologies for better auto body projects, from the material to the taper to the density to the attachment system. Auto body professionals can get the most out of their sanding projects and their operations.

Resources
Customer Reviews
3M™ Hookit™ Abrasive Disc Pad is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Soft yet Firm I really like these pads. They're great for sanding primer to final denibbing, there soft but still pretty firm for rounded areas. not sure if they have a 3" version but that would be a great addition.
Date published: 2017-12-09
  • y_2019, m_10, d_17, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_B40066079|3m-country-catalog|FUZEexperience|en_US, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_3m-country-catalog
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 39ms
  • REVIEWS, PRODUCT
Product Support

Specific product and application questions

SEND US A MESSAGE

Message Us

We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

All fields are required unless indicated optional.

  • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English