1. All 3M Products

3M™ Hand-Masker™ M3000

  • Saves time when preparing for painting, ceiling texturing, exterior wall finishing or floor sanding
  • Applies painter's tape to masking film or paper in one continuous application
  • Use with 3M™ Hand-Masker™ masking films and ScotchBlue™ Painter's tapes
  • Use with 3M™ Hand-Masker™ Film Blade (sold separately)
 More...
Details

The 3M™ Hand-Masker™ M3000 Dispenser applies masking tape to masking film or paper in one continuous application. It's a seamless 4-in-1 tool compared to the paper/poly method, which requires many more steps and materials.

  • Saves time when preparing for painting, ceiling texturing, exterior wall finishing or floor sanding
  • Applies painter's tape to masking film or paper in one continuous application
  • Use with 3M™ Hand-Masker™ masking films and ScotchBlue™ Painter's tapes
  • Use with 3M™ Hand-Masker™ Film Blade (sold separately)
  • 4 to 5 times faster than paper/poly method
  • M3000 Dispenser is compact and lightweight with an easy-grip handle
Specifications
Attribute Name
Value
Application
Masking for Painting, Paint Preparation Masking
Brand
3M™
Color Family
Multi-color, Yellow
Selling Country
United States
Tape Width (Imperial)
11.13 in
Tape Width (Metric)
28.3 cm
Customer Reviews
3M™ Hand-Masker™ M3000 is rated 3.5 out of 5 by 18.
Rated 5 out of 5 by from Time saver 3M sent this to me to try out. As a professional painter I couldn't survive without one of these. Just put on the appropriate blade for plastic or paper and you are set. You can get the plastic in different sizes and this lets you tear off the needed width. The amount of time this saves is way worth the cost.
Date published: 2021-03-06
Rated 5 out of 5 by from Well built Very sturdy well built tool for the trade great when I paint ceilings only
Date published: 2021-03-06
Rated 5 out of 5 by from Greatest Invention These hand maskers are the bomb, they expedite and and all projects. My brother, years ago, had one, not a 3M, he hated it, regretted ever buying, nothing touches the 3M version. One thing I miss though, and strangely enough they still make the slot for it and that was the additional 1" tape dispenser they had on the top, that thing was very handy, but I know why they stopped it, too fragile, I bought a dozen once when you could still get them, broke everyone of them! Not all ideas work out, still a great tool.
Date published: 2021-03-06
Rated 5 out of 5 by from Make's taping job a lot easier. This is my third hand masker, make's taping a lot faster.
Date published: 2021-03-05
Rated 4 out of 5 by from Practice makes perfect Great product but you need to practice using it so you don't end up wasting materials
Date published: 2021-03-05
Rated 5 out of 5 by from A must have for masking projects I used my 3m masker to mask walls to prepare for spraying a popcorn ceiling. The masker made life so much easier prepping out the rooms. A sharp cutter (sold separately) attached to the 3m masker bit right through the tape and plastic. Well done 3m!
Date published: 2021-03-05
Rated 5 out of 5 by from the one and the ONLY. ignorance is bliss? answer: you have to be smarter than the handy masker! if your not than get off the job and stay away from the Depot. These things are a no brainer because there is no other professional options at all period. I bought Two maskers.one for paper and one for plastic to eliminate the hassle. theses things are tough. they fall off 2 story roofs and extension ladders constantly. I really appreciate the fact that i can just replace a cut blade if needed because of the falls. And to all the haters who just dont know: venture over to ACE and buy the exact same masker for double the price and i bet it’ll work so much better for y’all. THANKS 3-M keep up the hard work! your products are invaluable
Date published: 2020-07-14
Rated 4 out of 5 by from Did The Job , & Better ! I purchased at Lowe’s , I had to study , but I did figure it out . I Love it ! Does take some patience, I had over 200 ft. Of wall to cover today 10’ ceilings. I could only reach 4 ft , so each time I had to cut, move ladder and start again , then I stopped, I cut a 2X2 1” longer than height , put dbl stick tap on each end of stick Then each time I stoped to move ladder, I put the board under the tool , to hold it up ... that help a Lot ! Then I was on the Run !
Date published: 2020-04-15
  • y_2021, m_3, d_7, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_US, sid_CBGNARUS2526|3m-country-catalog|FUZEexperience|en_US, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_3m-country-catalog
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 50ms
  • REVIEWS, PRODUCT