1. 3M United States
  2. All 3M Products

3M™ 5815-D Dead End

Part Number 5815-D3M ID 80610983175UPC 00054007042334
  • Dead-ends tape shield, wire shield, UniShield® and JCN cables
  • Modular design for future splice applications.
  • Accommodates wire size of 2 AWG to 750 kcmil (stranded) (Cu) and 2 AWG to 1000 kcmil (stranded) (Al)
  • Rated for 5 to 25 kV, 600 amp
 More...
View all details
View Legal Disclaimer
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Brand
3M™
Details
  • Dead-ends tape shield, wire shield, UniShield® and JCN cables
  • Modular design for future splice applications.
  • Accommodates wire size of 2 AWG to 750 kcmil (stranded) (Cu) and 2 AWG to 1000 kcmil (stranded) (Al)
  • Rated for 5 to 25 kV, 600 amp
  • Includes 1 tee module, 2 dead-end plugs, 1 connecting stud, 1 instruction booklet and 1 silicone lubricant
  • Meets ANSI/IEEE Standard 386
  • 1 kit/case

3M™ Dead-End Modular Kit contains all the accessories required for cable splicing. This kit contains 1 tee module, 2 dead-end plugs, 1 connecting stud and 1 silicone lubricant. The kit is rated for 5 to 25 kV and 600 amps industrial shielded power cables. The modular kit is suitable for operation in submerged locations.

3M™ Dead-End Modular Kit includes 1 tee module, 2 dead-end plugs, 1 connecting stud, 1 instruction booklet and 1 silicone lubricant. This kit is for dead-end splicing with future add-on capability in a modular design that allows for splicing configurations. The dead-end plug provides a high impedance test point for safely checking the de-energized status of the circuit.

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.