1. All 3M Products

3M™ Glass Bubbles HGS8000X, 700 lb 4 ft, Bag

3M Product Number HGS8000X3M ID 98021235233UPC 00051135719404
  • Successfully and predictably reduces the control fluid density
  • Prevents or minimizes fluid loss/lost circulation and formation damage
  • Incompressible and more homogeneous control fluid properties compared with foamed and aerated systems
  • Eliminates the need for specialized equipment used in foamed and aerated systems
 More...
Typical Properties
Attribute Name
Value
Application
Cementing, Drilling Fluids
Brand
3M™
Capabilities
Chemical Resistance, Lightweighting, Temperature Resistance
Color
White
Color (unaided eye)
White, powdery
Composition
Soda-lime-borosilicate glass
Crush Strength
8,000
Density (g/cc)
0.42
Industries
Cementing and Drilling Fluids
Median Particle Diameter
22
Net Weight (Imperial)
700 lb
Strength (MPa)
55.1
Details
  • Successfully and predictably reduces the control fluid density
  • Prevents or minimizes fluid loss/lost circulation and formation damage
  • Incompressible and more homogeneous control fluid properties compared with foamed and aerated systems
  • Eliminates the need for specialized equipment used in foamed and aerated systems
  • Potential for reduced Non Productive Time (NPT), improved well integrity and increased well productivity

3M™ Glass Bubbles HGS8000X are hollow glass spheres designed for use in drilling, completion, and workover fluids, as well as cement slurries for the oil and gas industry. With a nominal density of 0.42 g/cc and an isostatic crush strength of 8,000 psi (pounds per square inch), HGS8000X are well-suited for use in moderate to deep wells.

What are 3M™ Glass Bubbles?
3M™ Glass Bubbles HGS Series are engineered hollow glass spheres made from water-resistant and chemically-stable soda-lime-borosilicate glass. The use of 3M glass bubbles HGS series as density reducing agents in well construction applications offer the potential for:

  • Reduced Non Productive Time (NPT)
  • Improved well integrity
  • Increased well productivity

When drilling and cementing across highly depleted zones and weaker formations, low density systems are required to prevent or minimize fluid loss/lost circulation, formation damage and other problems associated with excessive overbalance conditions. Our 3M Glass bubbles offer stability by maintaining target pressures with greater reliability throughout the drilling process. Minimizing the differential pressure (bottom hole pressure minus reservoir pressure) is essential for the success of any drilling operation.

Learn more about 3M™ Glass Bubbles — HGS Series (PDF, 198.74 Kb)

3M™ Glass Bubbles HGS8000X in Cementing
3M glass bubbles HGS8000X added to light weight cement slurries help prevent problems associated with excessive overbalance, including reduced top of cement (TOC) and thus the need for remedial squeeze. Additional benefits include the potential for:
  • Reduced wait-on-cement (WOC)
  • Reduced need for multi-staging

When compared with other microspheres, cementing with HGS8000X in moderate to deep wells offers:
  • Consistency batch-to-batch and location-to-location
  • Greater density reduction capacity (cement slurry density values below 9.0 lb/gal (1.1 Kg/l) have been achieved)

Learn more about 3M™ Glass Bubbles for Cements (PDF, 138.87 Kb)

3M Glass Bubbles HGS8000X in Drilling, Completion and Workover Fluids
The use of light weight completion and work-over fluids made with 3M glass bubbles HGS8000X help reduce and control the bottom-hole pressure, offering the potential for reduced fluid loss and lost circulation — as well as preventing or minimizing formation damage. 3M glass bubbles HGS8000X in completion and workover fluids are:
  • More economical and allow for a greater density reduction window than synthetic oils
  • Compatible with both water based and oil based systems
  • Resistant to harsh downhole conditions

3M glass bubbles HGS Series are specially formulated for high strength-to-weight ratio, allowing for greater survivability under demanding downhole conditions. The durability also allows for possible reconditioning and reuse of lightweight fluid to help reduce costs; this is achieved with our 3M glass bubbles HGS8000X— an economical product that is compatible with both water and oil based systems.

Learn more about 3M™ Glass Bubbles for Drilling (PDF, 218.79 Kb)

Repeated Use Increases Efficiency, Saves Money
3M glass bubbles HGS Series are specially formulated for high strength-to-weight ratio, allowing for greater survivability under demanding downhole conditions. The durability also allows for possible reconditioning and reuse of lightweight fluid to help reduce costs. When HGS8000X are added to the drilling fluid and they remain there while circulating through solids control equipment, including shale shakers, hydro cyclones and centrifuges. The tiny bubbles remain dispersed in water, or oil-based drilling fluid for repeated use, allowing solids to be removed without losing the glass bubbles.

Additionally, 3M glass bubbles HGS8000X are:
  • Light: when synthetic oils are used as base fluid, densities as low as 5.5 lb/gal (0.66 Kg/l) can be achieved
  • Tiny: with 26 micron average size, HGS8000X remain in the fluid when circulating through solids control equipment, including shale shakers, hydro cyclones and centrifuges
  • Tough: resistant to shear and impact forces when circulating through bit nozzles and impacting formation walls

This product offers the potential for higher performance through increased rate of penetration (ROP) and can reduce costs through reconditioning and reuse of lightweight fluid.

Learn more about 3M™ Glass Bubbles (PDF, 1.2 Mb)

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English