1. All 3M Products

3M™ Glass Bubbles HGS4000, Bulk Tanker (30,000 lb)

3M Product Number HGS40003M ID 98021233006UPC 00051135717066
  • Successfully and predictably reduces the control fluid density
  • Prevents or minimizes fluid loss/lost circulation and formation damage
  • Incompressible and more homogeneous control fluid properties compared with foamed and aerated systems
  • Eliminates the need for specialized equipment used in foamed and aerated systems
 More...
Typical Properties
Attribute Name
Value
Application
Cementing, Drilling Fluids
Brand
3M™
Capabilities
Chemical Resistance, Lightweighting, Temperature Resistance
Color
White
Color (unaided eye)
White, powdery
Composition
Soda-lime-borosilicate glass
Crush Strength
4,000
Density (g/cc)
0.38
Industries
Cementing and Drilling Fluids
Median Particle Diameter
40
Net Weight (Imperial)
30000 lb
Strength (MPa)
27.5
Details
  • Successfully and predictably reduces the control fluid density
  • Prevents or minimizes fluid loss/lost circulation and formation damage
  • Incompressible and more homogeneous control fluid properties compared with foamed and aerated systems
  • Eliminates the need for specialized equipment used in foamed and aerated systems
  • Potential for reduced Non Productive Time (NPT), improved well integrity and increased well productivity

3M™ Glass Bubbles HGS4000 are hollow glass spheres designed for use in drilling, completion, and workover fluids, as well as cement slurries in the oil and gas industry. With a nominal density of 0.38 g/cc and an isostatic crush strength of 4,000 psi (pounds per square inch), HGS4000 are well-suited for use in shallow to intermediate depth wells.

What are 3M™ Glass Bubbles?
3M™ Glass Bubbles HGS Series are engineered hollow glass spheres made from water-resistant and chemically-stable soda-lime-borosilicate glass. The use of 3M glass bubbles HGS series as density reducing agents in well construction applications offer the potential for:

  • Reduced Non Productive Time (NPT)
  • Improved well integrity
  • Increased well productivity

When drilling and cementing across highly depleted zones and weaker formations, low density systems are required to prevent or minimize fluid loss/lost circulation, formation damage and other problems associated with excessive overbalance conditions. Our 3M glass bubbles offer stability by maintaining target pressures with greater reliability throughout the drilling process. Minimizing the differential pressure (bottom hole pressure minus reservoir pressure) is essential for the success of any drilling operation.

Learn more about 3M™ Glass Bubbles — HGS Series (PDF, 198.74 Kb)

3M™ Glass Bubbles HGS4000 in Cementing
3M glass gubbles HGS4000 added to light weight cement slurries help prevent problems associated with excessive overbalance, including reduced top of cement (TOC) and thus the need for remedial squeeze. Additional benefits include the potential for:
  • Reduced wait-on-cement (WOC)
  • Reduced need for multi-staging

When compared with other microspheres, cementing with HGS4000 in shallow to intermediate depth wells offers:
  • Consistency batch-to-batch and location-to-location
  • Greater density reduction capacity (cement slurry density values below 9.0 lb/gal (1.1 Kg/l) have been achieved)

Learn more about 3M™ Glass Bubbles for Cements (PDF, 138.87 Kb)

3M™ Glass Bubbles HGS4000 in Completion and Workover Fluids
The use of light weight completion and work-over fluids made with 3M glass bubbles HGS4000 help reduce and control the bottom-hole pressure, offering the potential for reduced fluid loss and lost circulation — as well as preventing or minimizing formation damage. 3M glass bubbles HGS4000 in completion and workover fluids are:
  • More economical and allow for a greater density reduction window than synthetic oils
  • Compatible with both water based and oil based systems
  • Resistant to harsh downhole conditions

3M glass bubbles HGS Series are specially formulated for high strength-to-weight ratio, allowing for greater survivability under demanding downhole conditions. The durability also allows for possible reconditioning and reuse of lightweight fluid to help reduce costs; this is achieved with our 3M glass bubbles HGS4000— an economical product that is compatible with both water and oil based systems.

Learn more about 3M™ Glass Bubbles for Drilling (PDF, 218.79 Kb)

Repeated Use Increases Efficiency, Saves Money
3M glass bubbles HGS Series are specially formulated for high strength-to-weight ratio, allowing for greater survivability under demanding downhole conditions. The durability also allows for possible reconditioning and reuse of lightweight fluid to help reduce costs. The tiny bubbles remain dispersed in water, or oil-based control fluid for repeated use.

Learn more about 3M™ Glass Bubbles (PDF, 1.2 Mb)

Request a Sample
  • All fields are required unless indicated optional

  •  
  • 3M™ Glass Bubbles are intended for industrial applications and manufactured to industrial specifications in conformance with various recognized industrial quality standards. These products are not intended, designed, manufactured or labeled for sale to or use by consumers, or for medical device, food/food supplement/food additive, drug, or cosmetics applications. 3M Advanced Materials Division (3M) will assess the intended use of 3M™ Glass Bubbles and reserves the right not to sample, sell or supply if 3M determines that it is not in a position to support the intended use of 3M™ Glass Bubbles.


    3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Submit

Thank You

Your form was submitted successfully!

Our Apologies...

An error has occurred while submitting. Please try again later...

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English