1. All 3M Products
  • 3M™ Glass Bubbles HGS10000
  • 3M™ Glass Bubbles HGS10000

    3M Product Number HGS10000
    • Successfully and predictably reduces the control fluid density
    • Prevents or minimizes fluid loss/lost circulation and formation damage
    • Incompressible and more homogeneous control fluid properties compared with foamed and aerated systems
    • Eliminates the need for specialized equipment used in foamed and aerated systems
     More...
    All Options
    Close
    Typical Properties
    Attribute Name
    Value
    Application
    Cementing, Drilling Fluids
    Brand
    3M™
    Capabilities
    Chemical Resistance, Lightweighting, Temperature Resistance
    Color (unaided eye)
    White, powdery
    Composition
    Soda-lime-borosilicate glass
    Crush Strength
    6,000
    Density (g/cc)
    0.6
    Industries
    Cementing and Drilling Fluids
    Median Particle Diameter
    30
    Net Weight (Imperial)
    1000 lb, 125 lb, 37000 lb, 5 lb
    Net Weight (Metric)
    16782.918 kg, 2.268 kg, 453.592 kg, 56.699 kg
    Product Color
    White
    Strength (MPa)
    41.37
    Details
    • Successfully and predictably reduces the control fluid density
    • Prevents or minimizes fluid loss/lost circulation and formation damage
    • Incompressible and more homogeneous control fluid properties compared with foamed and aerated systems
    • Eliminates the need for specialized equipment used in foamed and aerated systems
    • Potential for reduced Non Productive Time (NPT), improved well integrity and increased well productivity

    3M™ Glass Bubbles HGS10000 are hollow glass spheres designed for use in lightweight well cementing for the oil and gas industry. With a nominal density of 0.60 g/cc and an isostatic crush strength of 10,000 psi (pounds per square inch), HGS10000 are well-suited for use in deep wells.

    What are 3M™ Glass Bubbles?
    3M™ Glass Bubbles HGS Series are engineered hollow glass spheres made from water-resistant and chemically-stable soda-lime-borosilicate glass. The use of 3M glass bubbles HGS series as density reducing agents in well construction applications offer the potential for:

    • Reduced Non Productive Time (NPT)
    • Improved well integrity
    • Increased well productivity

    When drilling and cementing across highly depleted zones and weaker formations, low density systems are required to prevent or minimize fluid loss/lost circulation, formation damage and other problems associated with excessive overbalance conditions. Our 3M glass bubbles offer stability by maintaining target pressures with greater reliability throughout the drilling process. Minimizing the differential pressure (bottom hole pressure minus reservoir pressure) is essential for the success of any drilling operation.

    Learn more about 3M™ Glass Bubbles — HGS Series (PDF, 96.99 Kb)

    3M™ Glass Bubbles HGS10000 in Cementing
    3M glass bubbles HGS10000 added to light weight cement slurries help prevent problems associated with excessive overbalance, including reduced top of cement (TOC) and thus the need for remedial squeeze. Additional benefits include the potential for:

    • Reduced wait-on-cement (WOC)
    • Reduced need for multi-staging

    When compared with other microspheres, cementing with HGS10000 in deep wells offers:
    • Consistency batch-to-batch and location-to-location
    • Greater density reduction capacity (cement slurry density values below 9.0 lb/gal (1.1 Kg/l) have been achieved)

    Learn more about 3M™ Glass Bubbles for Low Density Drilling Fluids and Cements (PDF, 617.47 Kb)

    Learn more about 3M™ Glass Bubbles (PDF, 1.20 Mb)