1. All 3M Products

3M™ Finesse-it™ Wetordry™ Scallop Abrasive Disc 401Q

Part Number 059213M ID 60980023802UPC 00051131059214
  • Small-diameter disc is great for buffing, polishing and finishing on small surfaces
  • Light A-weight paper backing helps abrasive stay agile without significantly gouging or damaging surfaces
  • May be used with water and/or compounds
  • May be used with power tool or hand tools
 More...
Specifications
Attribute Name
Value
Attachment Type
PSA
Backing Weight
A Weight
Brand
Wetordry™
Case Quantity
10 Sleeves per Case
Color
Black, Gray
Diameter
1.375 in
Diameter (Metric)
34.925 mm
Grade Range
Fine (P500-P3000 +5000)
Grit
1500
Mineral Type
Silicon Carbide
Number per Inner
100 per Sleeve
Packaged Form
Sleeved
Performance Level
Best
Product Form
Disc
Sanding Method
Hand
Sanding Surface
Paint, Primer
Vacuum Support
No
Wet or Dry
Wet or Dry
Product Details
  • Small-diameter disc is great for buffing, polishing and finishing on small surfaces
  • Light A-weight paper backing helps abrasive stay agile without significantly gouging or damaging surfaces
  • May be used with water and/or compounds
  • May be used with power tool or hand tools
  • Pressure-sensitive adhesive (PSA) backing expedites tool attachment

Our 3M™ Finesse-it™ Wetordry™ Scallop Abrasive Disc 401Q is small but mighty: its overall diameter measures 1-3/8 inches. The small size lends itself to buffing, polishing and finishing on small surfaces – those areas where a tiny ding, scratch or imperfection can make all the difference.

3M™ Finesse-it™ Wetordry™ Scallop Abrasive Disc 401Q
Scalloped surface and light A-weight backing help reduce gouging during wet or dry sanding
The Science Behind Disc 401Q
We engineer our 3M™ Finesse-it™ Wetordry™ Scallop Abrasive Disc 401Q with silicon carbide mineral, which is adhered to an A-weight paper backing. A synthetic mineral, silicon carbide cuts sharp but leaves a bright finish. Its ability to finish fine is one of the primary reasons we chose this mineral for disc 401Q. The A-weight paper backing is the lightest among paper backings. This backing is desirable, because — given its lightness and malleability — it will respond well to the surface without significantly gouging or marring.

Additionally, disc 401Q has a pressure-sensitive adhesive backing, which means it adheres to a backup pad (sold separately) with slight manual pressure. Removing the disc is as simple as securing it — simply peel it away from the backup pad. Altogether, this attachment system expedites tool connections. It makes disc changeouts fast and easy, so you can focus on what matters most: your work.

The scalloped edge on disc 401Q adds a level of surface forgiveness that operators may otherwise be unable to attain with standard round discs. Because the edges are scalloped, if the disc accidentally tilts or abrades with its edge, it will be more forgiving than if it were a rounded edge. In this way, the risk of gouging or over cutting is reduced.

Keeping up Appearances
Sanding an automotive surface can be challenging; you want to repair or enhance the body's appearance without causing unnecessary damage. There are some steps you can take to maximize abrasive service life and approach the substrate with finesse.

For example, we recommend using water as a lubricant during sanding and spraying the abrasive disc with water before and after sanding each spot; it helps keep the disc clean and extend service life. 3M™ Wetordry™ products are backed with a proprietary durable waterproof paper backing that supports both wet and dry applications. Lighter weight than cloth, and smooth rather than textured, paper backing is preferable for lighter applications such as finishing and paint prep. At the same time, many such applications produce a significant amount of dust, clogging the abrasive points and creating an inferior work environment. These effects can be minimized by sanding with water to rinse dust away from the workpiece and the abrasive surface.

finesse-it-ii-finishing-material
Try sanding in a small circular motion with the pad flat against the surface and avoid over-sanding. Use extra caution to prevent over sanding when machine sanding near the edges of panels, which are less flexible and typically have thinner coatings. If preferred, these areas can even be hand sanded. In fact, our disc 401Q works well with 3M™ Finesse-it™ Hand Sanding Pad (sold separately).

3M™ Finesse-it™ Products
3M™ Finesse-it™ products are specially-engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. 3M™ Finesse-it™ products are an integral part of a 3M recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass. Altogether, 3M™ Finesse-it™ Wetordry™ Scallop Abrasive Disc 401Q is great when you want to achieve a final gleam and polish.

Customer Reviews
Product Support

Specific product and application questions

SEND US A MESSAGE

Message Us

We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

All fields are required unless indicated optional.

  • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English