- Provides soft, smooth surface for applying 3M™ Finesse-it™ polishes
- Waffle face provides sufficient contact surface without excess heat build up
- Repairs and restores coatings without repainting
- 3M™ Hookit™ attachment system holds pad securely and provides quick pad change-out
We manufacture 3M™ Finesse-it™ Buffing Pad - White Foam as our least aggressive, softest buffing pad in the 3M™ Finesse-it™ buffing pad family. This white buffing pad has a convoluted buffing surface designed to be used in conjunction with Finesse-it™ polishes, specially developed to achieve satin, semi-gloss or high gloss finishes on wood, automotive, marine, and aerospace coatings.
Buffing pad available in 3" and 5.25" sizes
Provides Soft, Smooth Surface for Applying 3M™ Finesse-It™ Polishes
3M™ Finesse-it™ Buffing Pad - White Foam removes the abrasive sand scratches that were created to remove small defects in automotive clear coats. You can also use this buffing pad in the 3M™ Finesse-it™ Trizact™ Paint Repair System for AOEM paint and clear coats whenever the finest finish is required. The waffle face minimizes heat buildup during buffing and helps eliminates swirl marks.
3M™ Hookit™ Attachment System Holds Pad Securely And Provides Quick Pad Change-Out
This pad is manufactured with our 3M™ Hookit™ attachment system for quick pad attachment and removal and to hold the pad securely in place during use. Hookit™ buffing pads conveniently and firmly attach to a hook-and-loop backup disc pad
(sold separately) on rotary or random orbital tools
, can be removed cleanly and easily, and can be re-used again and again for the life of the pad. Finish results are dependent on the combination of coating type, polish, and tools used.
Buffing pads should be used with Hookit™ Backup Disk Pads
Waffle Face Provides Sufficient Contact Surface without Excess Heat Build Up
We developed our line of foam pads to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They normally operate at higher RPMs than wool pads also, relying on a combination of cutting and heat buildup to slightly melt the surface coating and remove fine scratches, swirl marks, and surface marring. Foam pads range in abrasive levels determined by its softness and the cell size of the holes; the larger the hole, the more aggressive the pad. "Closed cell" pads are the least aggressive type. Foam buffing pads are used in conjunction with polishes and are suitable to use with rotary and random orbital tools.
Our line of 3M™ Finesse-it™ products are specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. Finesse-it products are an integral part of our recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass.