1. All 3M Products
  • 3M™ Embossed Copper Foil Shielding Tape 1245
  • 3M™ Embossed Copper Foil Shielding Tape 1245

    Part Number 1245
    • Dead soft 1-ounce (1.4-mil) copper foil backing for good shielding effectiveness, soldering and converting (slitting and die cutting).
    • UL recognized flame-retardancy per UL 510 for applications needing this property.
    • Embossed pattern through adhesive provides very low contact resistance between the substrate and the backing to drain static charge.
    • Acrylic pressure-sensitive adhesive has good resistance to heat, oxidation, solvents and oils.
     More...
    View Legal Disclaimer
    Details
    • Dead soft 1-ounce (1.4-mil) copper foil backing for good shielding effectiveness, soldering and converting (slitting and die cutting).
    • UL recognized flame-retardancy per UL 510 for applications needing this property.
    • Embossed pattern through adhesive provides very low contact resistance between the substrate and the backing to drain static charge.
    • Acrylic pressure-sensitive adhesive has good resistance to heat, oxidation, solvents and oils.
    • Removable liner makes it easy to handle and die cut complex shapes.
    • There are both standard and custom roll widths and lengths to meet a variety of application needs.

    3M™ Embossed Copper Foil Shielding Tape 1245 has a 1.4-mil embossed copper foil backing with acrylic pressure-sensitive adhesive and liner. Embossing makes excellent contact through the adhesive. The unplated copper is for non-corrosive conditions.

    Additional Information
    The 1245 tape has common EMI shielding 1.4-mil thick copper foil backing. Acrylic adhesive has good resistance to heat, oxidation, solvents and oils. The tape is UL Recognized for flame retardancy per UL 510. This tape is designed for a variety of applications: point-to-point electrical contact, EMI/RFI shielding, grounding and static charge draining. These tapes can used in both electronic & electrical devices, shielded rooms and EMI test laboratories for prototyping, design and troubleshooting. The 1245 tape is available from 3M in log rolls (standard size of 23 inch x 18 yds or 584 mm x 16,5 m) to 3M slitter/converters. Also, 3M offers to 3M authorized distributors (and slitter/converters) various size slit rolls for resale to end users. Custom die-cut and formed parts are available from 3M slitter/converters.

    Resources

    Legal Disclaimer

    Product Disclaimer
  • The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes.
  • 3M products shown on this website may not be available in all geographic regions or may not be available at this time. Please contact your local sales representative to determine product availability.

  • Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English