1. All 3M Products
  • 3M™ Dyneon™ Fluoroelastomer FT 2481
  • 3M™ Dyneon™ Fluoroelastomer FT 2481

    3M Product Number FT 2481
    Products
    • Made of terpolymer gumstock without incorporated curatives, allowing compounders to create their own cure package
    • Improved retention of elongation after long-term heat aging, compared with conventional 66% fluorine fluoropolymers
    • 3M™ Dyneon™ Fluoroelastomer FT 2481 is amine or bisphenol curable and can be used in compression molding
    • Improved acid resistance, and resistance to volume swell by organic solvents, compared with conventional 66% fluorine fluoropolymers
     More...
    Weight (Imperial)
    Container Volume
    Products Available
    Available options:
     Weight (Imperial) and Container Volume
    All Options
    Close
    Specifications
    Attribute Name
    Value
    Application
    Coatings
    Brand
    Dyneon™
    Capabilities
    Productivity Improvement
    Color
    Yellow, Translucent Amber
    Composition
    Terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene
    Compression Set
    24 %
    Container Type
    Box Gallon
    Container Volume
    2.2 lb., 55 Gallon
    Cure Technology
    Raw Gum
    Elongation
    220 %
    Fluorine Content
    68.6 %
    Industries
    CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
    Manufacturing Segment
    Powertrain
    Mooney Viscosity
    75 MU
    Net Weight (Imperial)
    2.2 lb, 55 lb
    Net Weight (Metric)
    1 kg
    Post Cure
    24 h @ 260°C
    Press Cure
    7 min @ 177°C
    Product Form
    Slab
    Product Type
    FKM
    Shelf Life
    3 Year
    Specific Gravity
    1.86
    Tensile Strength at Break
    15.2 MPa (2,200 psi)
    Weight (Imperial)
    2.2 lb., 55 lb.
    Weight (Metric)
    1 kg, 25 kg
    Details
    • Made of terpolymer gumstock without incorporated curatives, allowing compounders to create their own cure package
    • Improved retention of elongation after long-term heat aging, compared with conventional 66% fluorine fluoropolymers
    • 3M™ Dyneon™ Fluoroelastomer FT 2481 is amine or bisphenol curable and can be used in compression molding
    • Improved acid resistance, and resistance to volume swell by organic solvents, compared with conventional 66% fluorine fluoropolymers

    3M™ Dyneon™ Fluoroelastomer FT 2481 is composed of terpolymer of vinylidene fluoride, hexafluoropropylene, and tetrafluoroethylene; it is well-suited for compression molding operations. With high fluorine content, Dyneon fluoroelastomer FT 2481 offers improved acid resistance, and resistance to volume swell by organic solvents, compared with conventional 66% fluorine fluoropolymers.

    Improved Resistance to Acid and Volume Swell
    3M™ Dyneon™ Fluoroelastomer FT 2481 is a terpolymer gumstock without incorporated curatives. It can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FT 2481 should be banded on the mill several minutes prior to adding the blended dry ingredients. Additionally, Dyneon fluoroelastomer FT 2481 offers improved retention of elongation after long-term heat aging, compared with conventional 66% fluorine fluoropolymers. Once mixed, the compounded stocks have good scorch resistance and storage stability. Notably, FT 2481 also provides improved acid resistance, and resistance to volume swell by organic solvents, compared with conventional 66% fluorine fluoropolymers.

    The Right Size to Fit the Job
    This product is sold in different sizes, so compounders and formulators can pick the right size for the job. Dyneon fluoroelastomer FT 2481 is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ibs (25.0 kg) boxes.

    Delivering Custom Solutions
    3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

    For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FT 2481 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

    Recommended Applications

    • O-Rings and other compression molded goods

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English