1. All 3M Products
  • 3M™ Dyneon™ Fluoroelastomer FT 2430
  • 3M™ Dyneon™ Fluoroelastomer FT 2430

    3M Product Number FT 2430
    Products
    • Broad temperature and chemical resistance helps improve product durability and longevity
    • Low viscosity gumstock without incorporated curatives allow compounders to create their own cure package
    • 3M™ Dyneon™ Fluoroelastomer FT 2430 is amine or bisphenol curable, and can be used as a viscosity modifier
    • Versatile use in a number of applications – injection and transfer molding, calendering and coatings
     More...
    Weight (Imperial)
    Container Volume
    Products Available
    Available options:
     Weight (Imperial) and Container Volume
    All Options
    Close
    Typical Properties
    Attribute Name
    Value
    Application
    Coatings
    Brand
    Dyneon™
    Capabilities
    Productivity Improvement
    Color
    Translucent Amber
    Composition
    Terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene
    Compression Set
    38 %
    Container Type
    Box Gallon
    Container Volume
    2.2 lb., 55 lb.
    Cure Technology
    Raw Gum
    Elongation
    255 %
    Fluorine Content
    68.6 %
    Industries
    CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
    Manufacturing Segment
    Powertrain
    Mooney Viscosity
    31 MU
    Net Weight (Imperial)
    2.2 lb, 55 lb
    Net Weight (Metric)
    1 kg, 25 kg
    Post Cure
    24 h @ 260°C
    Press Cure
    7 min @ 177°C
    Product Form
    Slab
    Product Type
    FKM
    Shelf Life
    3 Year
    Specific Gravity
    1.86
    Tensile Strength at Break
    13.4 MPa (1,950 psi)
    Weight (Imperial)
    2.2 lb., 55 lb.
    Weight (Metric)
    1 kg, 25 kg
    Details
    • Broad temperature and chemical resistance helps improve product durability and longevity
    • Low viscosity gumstock without incorporated curatives allow compounders to create their own cure package
    • 3M™ Dyneon™ Fluoroelastomer FT 2430 is amine or bisphenol curable, and can be used as a viscosity modifier
    • Versatile use in a number of applications – injection and transfer molding, calendering and coatings

    3M™ Dyneon™ Fluoroelastomer FT 2430 is a low viscosity raw gum terpolymer. With broad temperature and chemical resistance, this versatile product can be used in a number of applications, including injection and transfer molding, calendering and coatings. We recommend that users blend Dyneon fluoroelastomer FT 2430 with other fluoroelastomers to improve flow or use for coatings.

    Durable Product. Versatile Use.
    3M™ Dyneon™ Fluoroelastomer FT 2430 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FT 2430 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

    Importantly, Dyneon fluoroelastomer FT 2430 offers broad temperature and chemical resistance that helps improve product durability and longevity. In addition, this product is amine or bisphenol curable and can act as a viscosity modifier. With these features, FT 2430 can be used in a number of applications – injection and transfer molding, calendering and coatings.

    The Right Size to Fit the Job
    This product is sold in different sizes, so compounders and formulators can pick the right size for the job. Dyneon fluoroelastomer FT 2430 is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ibs (25.0 kg) boxes.

    Delivering Custom Solutions
    3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

    For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FT 2430 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

    Recommended Applications

    • Injection molding
    • Transfer molding
    • Calendering
    • Coatings

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English