1. All 3M Products

3M™ Dyneon™ Fluoroelastomer FT 2430

3M Product Number FT 2430
Products
  • Broad temperature and chemical resistance helps improve product durability and longevity
  • Low viscosity gumstock without incorporated curatives allow compounders to create their own cure package
  • 3M™ Dyneon™ Fluoroelastomer FT 2430 is amine or bisphenol curable, and can be used as a viscosity modifier
  • Versatile use in a number of applications – injection and transfer molding, calendering and coatings
 More...
Weight (Imperial)
Container Volume
Products Available
Available options:
 Weight (Imperial) and Container Volume
All Options
Close
Specifications
Attribute Name
Value
Application
Coatings
Brand
Dyneon™
Capabilities
Productivity Improvement
Color
Yellow, Translucent Amber
Composition
Terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene
Compression Set
38 %
Container Type
Box Gallon
Container Volume
2.2 lb., 55 lb.
Cure Technology
Raw Gum
Elongation
255 %
Fluorine Content
68.6 %
Industries
CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
Manufacturing Segment
Powertrain
Mooney Viscosity
31 MU
Net Weight (Imperial)
2.2 lb, 55 lb
Net Weight (Metric)
1 kg, 25 kg
Post Cure
24 h @ 260°C
Press Cure
7 min @ 177°C
Product Form
Slab
Product Type
FKM
Shelf Life
3 Year
Specific Gravity
1.86
Tensile Strength at Break
13.4 MPa (1,950 psi)
Weight (Imperial)
2.2 lb., 55 lb.
Weight (Metric)
1 kg, 25 kg
Details
  • Broad temperature and chemical resistance helps improve product durability and longevity
  • Low viscosity gumstock without incorporated curatives allow compounders to create their own cure package
  • 3M™ Dyneon™ Fluoroelastomer FT 2430 is amine or bisphenol curable, and can be used as a viscosity modifier
  • Versatile use in a number of applications – injection and transfer molding, calendering and coatings

3M™ Dyneon™ Fluoroelastomer FT 2430 is a low viscosity raw gum terpolymer. With broad temperature and chemical resistance, this versatile product can be used in a number of applications, including injection and transfer molding, calendering and coatings. We recommend that users blend Dyneon fluoroelastomer FT 2430 with other fluoroelastomers to improve flow or use for coatings.

Durable Product. Versatile Use.
3M™ Dyneon™ Fluoroelastomer FT 2430 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FT 2430 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

Importantly, Dyneon fluoroelastomer FT 2430 offers broad temperature and chemical resistance that helps improve product durability and longevity. In addition, this product is amine or bisphenol curable and can act as a viscosity modifier. With these features, FT 2430 can be used in a number of applications – injection and transfer molding, calendering and coatings.

The Right Size to Fit the Job
This product is sold in different sizes, so compounders and formulators can pick the right size for the job. Dyneon fluoroelastomer FT 2430 is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ibs (25.0 kg) boxes.

Delivering Custom Solutions
3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FT 2430 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

Recommended Applications

  • Injection molding
  • Transfer molding
  • Calendering
  • Coatings

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English