1. All 3M Products

3M™ Dyneon™ Fluoroelastomer FT 2350

3M Product Number FT 2350
Products
  • Broad chemical and temperature resistance for product longevity
  • Terpolymer has very good tensile strength; increases overall product durability
  • Versatile use in a number of applications – compression molding, transfer molding and calendering
  • Proprietary incorporated cure technology may help create more consistent part size from successive molding cycles
 More...
Weight (Imperial)
Container Volume
Products Available
Available options:
 Weight (Imperial) and Container Volume
All Options
Close
Specifications
Attribute Name
Value
Brand
Dyneon™
Capabilities
Productivity Improvement
Color
White, Off-White
Composition
Terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene
Compression Set
36 %
Container Type
Box Gallon, Tote Gallon
Container Volume
1320 lb., 2.2 lb., 55 lb.
Cure Technology
Incorporated Cure
Elongation
310 %
Fluorine Content
68.6 %
Industries
CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
Manufacturing Segment
Powertrain
Mooney Viscosity
56 MU
Net Weight (Imperial)
1320 lb, 2.2 lb, 55 lb
Net Weight (Metric)
1 kg, 25 kg, 598.739 kg
Post Cure
24 h @ 260°C
Press Cure
5 min @ 177°C
Product Form
Slab
Product Type
FKM
Shelf Life
3 Year
Specific Gravity
1.86
Tensile Strength at Break
15.2 MPa (2,210 psi)
Weight (Imperial)
1320 lb., 2.2 lb., 55 lb.
Weight (Metric)
1 kg, 25 kg, 600 kg
Details
  • Broad chemical and temperature resistance for product longevity
  • Terpolymer has very good tensile strength; increases overall product durability
  • Versatile use in a number of applications – compression molding, transfer molding and calendering
  • Proprietary incorporated cure technology may help create more consistent part size from successive molding cycles

3M™ Dyneon™ Fluoroelastomer FT 2350 is a 68.6% fluorine terpolymer of vinylidene fluoride, hexafluoropropylene, and tetrafluoroethylene. This product has medium-high viscosity and broad temperature and chemical resistance. Dyneon fluoroelastomer FT 2350 also offers a proprietary incorporated cure technology that may help create more consistent part size from successive mold cycles.

Excellent Temperature Resistance and Tensile Strength
3M™ Dyneon™ Fluoroelastomer FT 2350 is a terpolymer of vinylidene fluoride, hexafluoropropylene, and tetrafluoroethylene. It can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FT 2350 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

Importantly, our Dyneon fluoroelastomer FT 2350 offers broad chemical and temperature resistance, as well as very good tensile strength to help increase product durability and longevity. This product stands apart from others due to its proprietary incorporated cure (terpolymer gumstock) technology that may help create more consistent part size from successive molding cycles. With these attributes, Dyneon fluoroelastomer FT 2350 can be used in a number of applications, including compression molding, transfer molding and calendering.

The Right Size to Fit the Job
This product is sold in different sizes, so compounders and formulators can pick the right size for the job. Dyneon fluoroelastomer FT 2350 is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ibs (25.0 kg) boxes.

Delivering Custom Solutions
3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FT 2350 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

Recommended Applications

  • Compression molding
  • Transfer molding
  • Calendering

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English