1. All 3M Products

3M™ Dyneon™ Fluoroelastomer FLS 2530, 55 lb (25 kg) box

3M Product Number FLS 25303M ID 98021140367UPC 00051135024119
  • Broad chemical and temperature resistance for durability and product longevity
  • Can be used in a number of applications – injection and transfer molding, as well as calendering
  • Proprietary incorporated cure technology may help save time and increase throughput
  • Improved chemical resistance and excellent compression set performance compared with lower percent fluorine fluoropolymers
 More...
Typical Properties
Attribute Name
Value
Brand
Dyneon™
Capabilities
Productivity Improvement
Color
Off-White
Composition
Terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene
Compression Set
19 %
Container Type
Box Gallon
Container Volume
55 lb.
Cure Technology
Incorporated Cure
Elongation
255 %
Fluorine Content
69 %
Industries
CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
Manufacturing Segment
Powertrain
Mooney Viscosity
37 MU
Net Weight (Imperial)
55 lb
Net Weight (Metric)
25 kg
Post Cure
24 h @ 260°C
Press Cure
5 min @ 177°C
Product Form
Slab
Product Type
FKM
Shelf Life
3 Year
Specific Gravity
1.85
Tensile Strength at Break
15.2 MPa (2,200 psi)
Weight (Imperial)
55 lb.
Weight (Metric)
25 kg
Details
  • Broad chemical and temperature resistance for durability and product longevity
  • Can be used in a number of applications – injection and transfer molding, as well as calendering
  • Proprietary incorporated cure technology may help save time and increase throughput
  • Improved chemical resistance and excellent compression set performance compared with lower percent fluorine fluoropolymers

3M™ Dyneon™ Fluoroelastomer FLS 2530 is a molded grade, intermediate viscosity copolymer with 69% fluorine. This product offers excellent compression set resistance and improved chemical resistance compared with lower percent fluorine fluoropolymers.

High on Fluorine. Excellent Performance.
3M™ Dyneon™ Fluoroelastomer FLS 2530 is a copolymer of vinylidene fluoride and hexafluoropropylene. It can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FLS 2530 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

Notably, this product offers broad chemical and temperature resistance, as well as a proprietary incorporated cure technology that may help save time and increase throughput because a separate cure method is not required. In addition, this product stands out from others due to its 69% fluorine content which offers improved chemical resistance and excellent compression set resistance compared with lower percent fluorine fluoropolymers.

The Right Size to Fit the Job
This product is sold in different sizes, so compounders and formulators can pick the right size for the job. Dyneon fluoroelastomer FLS 2530 is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ibs (25.0 kg) boxes.

Delivering Custom Solutions
3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FLS 2530 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

Recommended Applications

  • Compression molding
  • Transfer molding
  • Calendering

Suggested Applications

  • O-rings, seals, gaskets and hose for the following markets:
  • Automotive Powertrain
  • Transportation Fuel Systems
  • Lubricant Application
  • Chemical Processing
  • Oil and Gas Exploration
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English