1. All 3M Products
  • 3M™ Dyneon™ Fluoroelastomer FE 5830Q
  • 3M™ Dyneon™ Fluoroelastomer FE 5830Q

    Products
    • Highest fluorine level (70.5%) extrusion grade 3M™ Dyneon™ Fluoroelastomer available
    • Broad chemical and temperature resistance for durability and product longevity
    • Proprietary incorporated cure technology may help save time during production
    • Produces smooth extrudates without the use of processing aids
     More...
    Weight
    Container Volume
    Products Available
    Available options:
     Weight and Container Volume
    All Options
    Close
    Typical Properties
    Attribute Name
    Value
    Brand
    Dyneon™
    Capabilities
    Productivity Improvement
    Color
    Opaque Off-White
    Composition
    Terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene
    Compression Set
    44 %
    Container Volume
    1320 lb., 2.2 lb., 55 lb.
    Cure Technology
    Incorporated Cure
    Elongation
    250 %
    Fluorine Content
    70.5 %
    Industries
    CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
    Manufacturing Segment
    Powertrain
    Mooney Viscosity
    33 MU
    Net Weight
    1320, 2.2, 55
    Post Cure
    24 h @ 260°C
    Press Cure
    7 min @ 177°C
    Product Form
    Slab
    Shelf Life
    3 Year
    Specific Gravity
    1.9
    Tensile Strength at Break
    11 MPa (1,600 psi)
    Weight
    1320 lb., 2.2 lb., 55 lb.
    Weight (metric)
    1 kg, 25 kg, 600 kg
    Details
    • Highest fluorine level (70.5%) extrusion grade 3M™ Dyneon™ Fluoroelastomer available
    • Broad chemical and temperature resistance for durability and product longevity
    • Proprietary incorporated cure technology may help save time during production
    • Produces smooth extrudates without the use of processing aids
    • Can be formulated to meet -40°C (-40°F) mandrel bend fuel hose specifications
    • Can be formulated to yield good permeation resistance to automotive fuels

    3M™ Dyneon™ Fluoroelastomer FE 5830Q is an intermediate viscosity terpolymer. This product has a proprietary incorporated cure technology as well as broad chemical and temperature resistance. Importantly, Dyneon fluoroelastomer FE 5830Q has the highest level of fluorine offered at 70.5% making it an excellent choice for extrusion processes.

    Broad Chemical and Temperature Resistance
    3M™ Dyneon™ Fluoroelastomer FE 5830Q is a terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene. It can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FE 5830Q should be banded on the mill several minutes prior to adding the blended dry ingredients.

    Notably, this fluoroelastomer has a proprietary incorporated cure technology that may help save time during production. The broad chemical and temperature resistance enhance durability and product longevity. For parts requiring very high fluorine levels, Dyneon fluoroelastomer FE 5830Q is an excellent choice. This product is our highest fluorine offering at 70.5%.

    The Right Size to Fit the Job
    This product is sold in different sizes, so compounders and formulators can pick the right size for the job. Dyneon fluoroelastomer FE 5830Q is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ibs (25.0 kg) boxes.

    Delivering Custom Solutions
    3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

    For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FE 5830Q is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

    Recommended Applications

    • Extrusion applications
    • Transfer molding

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English