1. All 3M Products

3M™ Dyneon™ Fluoroelastomer FE 5660Q, 1320 lb (599 kg) Tote

3M Product Number FE 5660Q3M ID 98021318146UPC 00051135331460
  • Broad chemical and temperature resistance for durability and product longevity
  • High viscosity version of 3M™ Dyneon™ Fluoroelastomer FE 5640Q is clean running and has excellent mold release
  • High viscosity fluoroelaster (FKM) with 66% fluorine
  • Proprietary incorporated cure technology may help create more consistent part size from successive molding cycles
 More...
Specifications
Attribute Name
Value
Brand
Dyneon™
Capabilities
Temperature Resistance
Color
White, Off-White
Composition
Dipolymer made from hexafluoropropylene and vinylidene fluoride
Compression Set
9 %
Container Type
Tote Gallon
Container Volume
1320 lb.
Cure Technology
Incorporated Cure
Elongation
200 %
Fluorine Content
65.9 %
Industries
CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
Manufacturing Segment
Powertrain
Mooney Viscosity
60 MU
Net Weight (Imperial)
1320 lb
Net Weight (Metric)
598.739 kg
Post Cure
24 h @ 260°C
Press Cure
5 min @ 177°C
Product Form
Slab
Product Type
FKM
Shelf Life
3 Year
Specific Gravity
1.8
Tensile Strength at Break
16.5 MPa (2,400 psi)
Weight (Imperial)
1320 lb.
Weight (Metric)
600 kg
Details
  • Broad chemical and temperature resistance for durability and product longevity
  • High viscosity version of 3M™ Dyneon™ Fluoroelastomer FE 5640Q is clean running and has excellent mold release
  • High viscosity fluoroelaster (FKM) with 66% fluorine
  • Proprietary incorporated cure technology may help create more consistent part size from successive molding cycles

3M™ Dyneon™ Fluoroelastomer FE 5660Q is a 66% fluorine copolymer of vinylidene fluoride and hexafluoropropylene. This product is clean running, and has broad temperature and chemical resistance with excellent mold release. The proprietary incorporated cure technology may help create more consistent part size from successive mold cycles.

Incorporated Cure and Excellent Mold Release
3M™ Dyneon™ Fluoroelastomer FE 5660Q is a copolymer of vinylidene fluoride and hexafluoropropylene. It can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FE 5660Q should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

Importantly, this product offers broad chemical and temperature resistance for durability and product longevity. In addition, FE 5660Q is a high viscosity version of 3M™ Dyneon™ Fluoroelastomer FE 5640Q that is clean running and has excellent mold release. The proprietary incorporated cure technology may help create more consistent part size from successive molding cycles.

The Right Size to Fit the Job
This product is sold in different sizes, so compounders and formulators can pick the right size for the job. Dyneon fluoroelastomer FE 5660Q is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ibs (25.0 kg) boxes.

Delivering Custom Solutions
We offer over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FE 5660Q is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

Recommended Applications

  • Compression molding
  • Transfer molding

Suggested Applications

  • O-rings
  • Seals
  • Gaskets and hose
  • Automotive Powertrain
  • Transportation Fuel Systems
  • Lubricant Application
  • Chemical Processing
  • Oil and Gas Exploration
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English