1. All 3M Products

3M™ Dyneon™ Fluoroelastomer FE 5643Q

3M Product Number FE 5643Q3M ID 98021196864UPC 00051135112892
  • 3M™ Dyneon™ Fluoroelastomer FE 5643Q is a faster curing version of 3M™ Dyneon™ Fluoroelastomer FE 5640Q
  • Intermediate viscosity fluorelastomer (FKM) with 66% fluorine
  • Excellent mold release may help to improve the quality of finished parts
  • Brilliant cure technology and scorch resistance at high molding temperatures, resulting in more consistent part size from successive molding cycles
 More...
Specifications
Attribute Name
Value
Brand
Dyneon™
Color Family
White
Composition
Dipolymer made from hexafluoropropylene and vinylidene fluoride
Compression Set
11 %
Container Volume
2.2 lb.
Cure Technology
Incorporated Cure
Elongation
180 %
Fluorine Content
65.9 %
Industries
CPI/Semicon, Electrical, Oil and Gas, Rubber and Plastic, Transportation
Manufacturing Segment
Powertrain
Mooney Viscosity
40 MU
Net Weight (Imperial)
2.2 lb
Post Cure
24 h @ 260°C
Press Cure
5 min @ 177°C
Product Color
Off-white
Product Form
Slab
Shelf Life
3 Year
Specific Gravity
1.8
Tensile Strength at Break
16.5 MPa (2,400 psi)
Weight (Imperial)
2.2 lb.
Weight (Metric)
1 kg
Details
  • 3M™ Dyneon™ Fluoroelastomer FE 5643Q is a faster curing version of 3M™ Dyneon™ Fluoroelastomer FE 5640Q
  • Intermediate viscosity fluorelastomer (FKM) with 66% fluorine
  • Excellent mold release may help to improve the quality of finished parts
  • Brilliant cure technology and scorch resistance at high molding temperatures, resulting in more consistent part size from successive molding cycles

3M™ Dyneon™ Fluoroelastomer FE 5643Q is an intermediate viscosity copolymer of vinylidene fluoride and hexafluoropropylene with 66% fluorine. This fluoroelastomer (FKM) offers a number of important features and upgrades including excellent mold release, improved cure, and scorch resistance for very good performance in compression molding and high molding temperatures.

Improved, Faster Cure. Better Finished Parts.
3M™ Dyneon™ Fluoroelastomer FE 5643Q is a copolymer of vinylidene fluoride and hexafluoropropylene. This product can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FE 5643Q should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. Our Dyneon fluoroelastomer FE 5643Q is clean running and offers a number of important features. First, FE 5643Q is a faster curing version of 3M™ Dyneon™ Fluoroelastomer FE 5640Q. Faster cure means faster results to keep jobs moving quickly and to help increase throughput.

Not only is the cure quicker, FE 5643Q offers overall improvements including improved scorch resistance at high molding temperatures – resulting in more consistent part size from successive molding cycles. The excellent mold release may help improve the quality of finished parts as well.

The Right Size to Fit the Job
Compounders and formulators can find the right size to meet the needs of the job. Our Dyneon fluoroelastomer FE 5643Q is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 lbs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 lbs (12.5 kg) of product. Smaller quantities are available in 55.1 lbs (25.0 kg) boxes.

Delivering Custom Solutions
We offer over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering combined with our expertise in application and product development translates into greater design flexibility.

For decades, 3M has been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FE 5643Q is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

Recommended Applications

  • Compression molding
  • Transfer molding
  • Extrusion