1. All 3M Products

3M™ Dyneon™ Fluoroelastomer FE 5623

3M Product Number FE 5623
Products
  • Low viscosity fluorelastomer (FKM) can be used in a number of applications – injection and transfer molding, extrusion and calendering
  • Improved scorch resistance at high molding temperatures
  • Proprietary incorporated cure technology may help save time and improve throughput
  • Clean running with excellent mold release for use in automated injection molding equipment
 More...
Weight (Imperial)
Container Volume
Products Available
Available options:
 Weight (Imperial) and Container Volume
All Options
Close
Typical Properties
Attribute Name
Value
Brand
Dyneon™
Capabilities
Temperature Resistance
Color
Off-White
Composition
Dipolymer made from hexafluoropropylene and vinylidene fluoride
Compression Set
13 %
Container Type
Box Gallon
Container Volume
2.2 lb., 55 lb.
Cure Technology
Incorporated Cure
Elongation
180 %
Fluorine Content
65.9 %
Industries
CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
Manufacturing Segment
Powertrain
Mooney Viscosity
24 MU
Net Weight (Imperial)
2.2 lb, 55 lb
Net Weight (Metric)
1 kg, 25 kg
Post Cure
24 h @ 260°C
Press Cure
5 min @ 177°C
Product Form
Slab
Product Type
FKM
Shelf Life
3 Year
Specific Gravity
1.8
Tensile Strength at Break
15.8 MPa (2,300 psi)
Weight (Imperial)
2.2 lb., 55 lb.
Weight (Metric)
1 kg, 25 kg
Details
  • Low viscosity fluorelastomer (FKM) can be used in a number of applications – injection and transfer molding, extrusion and calendering
  • Improved scorch resistance at high molding temperatures
  • Proprietary incorporated cure technology may help save time and improve throughput
  • Clean running with excellent mold release for use in automated injection molding equipment
  • Improved cure technology resulting in more consistent part size from successive molding cycles

3M™ Dyneon™ Fluoroelastomer FE 5623 is a copolymer of vinylidene fluoride and hexafluoropropylene with 66% fluorine. This fluoroelastomer (FKM) offers improved scorch resistance and proprietary incorporated cure technology that may help save time and improve throughput. With an improved cure technology, users can create more consistent part size from successive molding cycles.

Excellent Mold Release and Improved Cure
3M™ Dyneon™ Fluoroelastomer FE 5623 is a copolymer of vinylidene fluoride and hexafluoropropylene. This product can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FE 5623 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

Dyneon fluoroelastomer FE 5623 has a number of favorable attributes that make it suitable for use in a number of applications – injection and transfer molding, extrusion and calendering. FE 5623 offers improved scorch resistance at high molding temperatures. When it comes to quality and consistency, FE 5623 is clean running, has excellent mold release and can be used in automated injection molding equipment. Lastly, the improved cure technology results in more consistent part sizes from successive molding cycles.

Different Quantities to Fit the Job
Dyneon fluoroelastomer FE 5623 is available in different sizes, so formulators can find the right size for the job. FE 5623 is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ib (25.0 kg) boxes.

Delivering Custom Solutions
We offer over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering combined with our expertise in application and product development translates into greater design flexibility.

For decades, 3M has been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FE 5623 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

Applications

  • Injection molding
  • Transfer molding
  • Extrusion
  • Calendering

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English