1. All 3M Products
  • 3M™ Dyneon™ Fluoroelastomer FC 2211
  • 3M™ Dyneon™ Fluoroelastomer FC 2211

    3M Product Number FC 2211
    Products
    • Ultra-low viscosity gumstock without an incorporated curative
    • Offers greater flow and filler loadings compared to conventional high-viscosity 66% fluoropolymers
    • Used in transfer and injection molding, extrusion, calendering and coatings
    • Can be used as a viscosity modifier
     More...
    Weight (Imperial)
    Weight_Imperial
    Container Volume
    Container_Volume
    Products Available
    Available options:
     Weight (Imperial) and Container Volume
    All Options
    Close
    Typical Properties
    Attribute Name
    Value
    Application
    Coatings
    Brand
    Dyneon™
    Capabilities
    Temperature Resistance
    Composition
    Dipolymer made from hexafluoropropylene and vinylidene fluoride
    Compression Set
    17 %
    Container Type
    Box Gallon
    Container Volume
    2.2 lb., 55 lb.
    Cure Technology
    Raw Gum
    Elongation
    180 %
    Fluorine Content
    65.9 %
    Industries
    CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
    Manufacturing Segment
    Powertrain
    Mooney Viscosity
    20 MU
    Net Weight (Imperial)
    2.2 lb, 55 lb
    Net Weight (Metric)
    1 kg, 25 kg
    Post Cure
    24 h @ 260°C
    Press Cure
    7 min @ 177°C
    Product Form
    Slab
    Product Type
    FKM
    Shelf Life
    3 Year
    Specific Gravity
    1.8
    Tensile Strength at Break
    12.9 MPa (1,870 psi)
    Weight (Imperial)
    2.2 lb., 55 lb.
    Weight (Metric)
    1 kg, 25 kg
    Details
    • Ultra-low viscosity gumstock without an incorporated curative
    • Offers greater flow and filler loadings compared to conventional high-viscosity 66% fluoropolymers
    • Used in transfer and injection molding, extrusion, calendering and coatings
    • Can be used as a viscosity modifier
    • Amine or bisphenol curable

    3M™ Dyneon™ Fluoroelastomer FC 2211 is an ultra-low viscosity copolymer of vinylidene fluoride and hexafluoropropylene containing 65.9% fluorine. This fluoroelastomer (FKM) offers greater flow and filler loadings compared to conventional high-viscosity fluoroelastomers. It is a raw gumstock and is curable using amine or bisphenol-type curing agents.

    A Versatile FKM
    3M™ Dyneon™ Fluoroelastomer FC 2211 boasts numerous favorable attributes that make it suitable for use in transfer and injection molding, extrusion, calendering and coatings. It does not feature an incorporated curative, but is amine or bisphenol curable.

    Dyneon fluoroelastomer FC 2211 can be compounded using standard water-cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer (FKM) formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, FC 2211 should be banded on the mill prior to adding the blended dry ingredients.

    Offering Different Quantities to Meet the Needs of the Job
    Dyneon fluoroelastomer FC 2211 is packaged in slab form and is available in a returnable bulk shipping container system for 1,320 Ibs (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs (12.5 kg) of product. Smaller quantities are available in 55.1 Ib (25.0 kg) boxes.

    Delivering Custom Solutions
    3M offers over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering, combined with our expertise in application and product development, translates into greater design flexibility.

    For decades, we have been able to supply unique solutions to meet the increasing market challenges in developing and producing state-of-the-art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™ Dyneon™ Fluoroelastomer FC 2211 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has decades of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

    Recommended Applications

    • Injection molding
    • Transfer molding
    • Extrusion
    • Calendering
    • Coatings

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English