1. All 3M Products
  • 3M™ Dyneon™ Fluoroelastomer FC 2144
  • 3M™ Dyneon™ Fluoroelastomer FC 2144

    3M Product Number FC 2144
    Products
    • Proprietary incorporated cure technology may help save time and improve throughput
    • Broad chemical and temperature resistance for durability and product longevity
    • Versatile use in a number of applications – transfer and compression molding, bonded seals and calendering
    • Excellent release and hot tear properties essential for demolding complex geometric profiles and parts containing severe undercuts
     More...
    Weight (Imperial)
    Container Volume
    Products Available
    Available options:
     Weight (Imperial) and Container Volume
    All Options
    Close
    Typical Properties
    Attribute Name
    Value
    Brand
    Dyneon™
    Capabilities
    Temperature Resistance
    Color
    Off-White
    Composition
    Dipolymer made from hexafluoropropylene and vinylidene fluoride
    Compression Set
    17 %
    Container Type
    Box Gallon, Tote Gallon
    Container Volume
    1320 lb., 2.2 lb., 55 lb.
    Cure Technology
    Incorporated Cure
    Elongation
    260 %
    Fluorine Content
    65.9 %
    Industries
    CPI/Semicon, Defense, Electrical, Mining, Oil and Gas, Rubber and Plastic, Transportation
    Manufacturing Segment
    Powertrain
    Mooney Viscosity
    41 MU
    Net Weight (Imperial)
    1320 lb, 2.2 lb, 55 lb
    Net Weight (Metric)
    1 kg, 25 kg, 598.739 kg
    Post Cure
    24 h @ 260°C
    Press Cure
    5 min @ 177°C
    Product Form
    Slab
    Product Type
    FKM
    Shelf Life
    3 Year
    Specific Gravity
    1.8
    Tensile Strength at Break
    17.5 MPa (2,540 psi)
    Weight (Imperial)
    1320 lb., 2.2 lb., 55 lb.
    Weight (Metric)
    1 kg, 25 kg, 600 kg
    Details
    • Proprietary incorporated cure technology may help save time and improve throughput
    • Broad chemical and temperature resistance for durability and product longevity
    • Versatile use in a number of applications – transfer and compression molding, bonded seals and calendering
    • Excellent release and hot tear properties essential for demolding complex geometric profiles and parts containing severe undercuts

    3M™ Dyneon™ Fluoroelastomer FC 2144 is a copolymer of vinylidene fluoride and hexafluoropropylene. This fluoroelastomer (FKM) has an incorporated cure with 66% fluorine content. This medium viscosity product has low permeation, and excellent release and hot tear properties that are essential for demolding complex geometric profiles and parts containing severe undercuts.

    Excellent Release for Complex Geometric Profiles
    3M™ Dyneon™ Fluoroelastomer FC 2144 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The dry ingredients should be blended before adding to the masticated gum. For best results, Dyneon fluoroelastomer FC 2144 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability.

    This clean running fluoroelastomer has a number of notable features beginning with broad chemical and temperature resistance: -18°C (-0.4°F) to 250°C (482°F). In addition, the proprietary incorporated cure technology may help save time and improve throughput. Dyneon fluoroelastomer FC 2144 has medium viscosity, low permeation and a fluorine content of 66%. Importantly, the excellent release and hot tear properties are essential for demolding complex geometric profiles and parts containing severe undercuts. With these attributes, FC 2144 can be used for a number of applications – transfer and compression molding, bonded seals, and calendering.

    The Right Size to Fit the Job
    This product is sold in different sizes, so compounders and formulators can pick the right size for the job. FC 2144 is packaged in milled slab form (as opposed to unmilled forms like crumb) and is available in a returnable bulk shipping container system for 1,320 Ibs. (600 kg) of material. The bulk container system is comprised of 48 individual polyethylene bags containing 27.5 Ibs. (12.5 kg) of product. Smaller quantities are available in 55.1 Ib (25.0 kg) boxes.

    Delivering Custom Solutions
    We offer over 50 grades of fluoroelastomers with varying monomer composition, Mooney viscosity and fluorine content. This broad offering combined with our expertise in application and product development translates into greater design flexibility.

    For decades, 3M has been able to supply unique solutions to meet the increasing market challenges in developing and producing state of the art fluoroelastomer products at the highest quality level. This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, 3M™Dyneon Fluoroelastomer FC 2144 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our staff has hundreds of years of experience researching, developing and improving upon fluoroelastomers. Toward that end, we are in regular communication with customers who deliver feedback – allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to our customers. From coatings to calendered sheets, tubing to molded goods, 3M has a solution for your specialty application.

    Recommended Applications

    • Bonded seals
    • Complex geometric profiles
    • Transfer molding
    • Compression molding
    • Calendering

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English