1. All 3M Products
  • 3M™ Dual Lock™ Reclosable Fastener SJ3763, Die-Cut Piece Part, Stem Density 400, Black
  • 3M™ Dual Lock™ Reclosable Fastener SJ3763, Die-Cut Piece Part, Stem Density 400, Black

    3M ID B40072178
    • Interlocking mushroom-shaped stems snap together to form a strong, fast and easy attachment
    • Round, die-cut base incorporates counter-sunk hole for attachment using screws or rivets
    • Strong holding power reduces the rattling and vibration of components
    • Resistant to high temperatures and solvents
     More...
    Product Details
    • Interlocking mushroom-shaped stems snap together to form a strong, fast and easy attachment
    • Round, die-cut base incorporates counter-sunk hole for attachment using screws or rivets
    • Strong holding power reduces the rattling and vibration of components
    • Resistant to high temperatures and solvents
    • Does not require any special tools or processing equipment for installation
    • Audibly snaps together for a secure, dependable and repeatable attachment
    • Mates with other stem densities to achieve a variety of engagement and disengagement forces

    3M™ Dual Lock™ Reclosable Fastener SJ3763, Die-Cut Piece Part is a round, 20.6mm diameter, reclosable fastener with a rigid polypropylene backing and a counter sunk hole for screws or rivets. It has a stem density of 400 stems per square inch. The mushroom-shaped stems interlock to supply very high tensile strength and replace mechanical fasteners in many applications.

    Reclosable Fastener SJ3763
    The mushroom-shaped stems snap together tightly for dependable repeatable attachment
    Convenient for Automotive Trim
    Ideal for attaching automotive trim components, 3M™ Dual Lock™ Reclosable Fastener SJ3763 Die-Cut Piece Part provides a high-strength closure that is easy to assemble and just as easy to open and reclose in high cycle applications. Moreover, the pieces audibly snap together with a satisfying click to form a secure, dependable and repeatable attachment.

    Designed with hundreds of interlocking mushroom-shaped stems, this polypropylene fastener can replace conventional attachments such as screws or adhesives, which can be time-consuming to fit and assemble, may weaken the part, or are susceptible to vibration and weather extremes. Dual Lock fasteners are constructed with polyolefin stems and hold tight regardless of high heat, cold, moisture or humidity. These fasteners are also an excellent attachment solution when vibration is an issue — not only do the fasteners hold tight, but actually reduce vibration and rattling.

    Learn more about Dual Lock™ Reclosable Fasteners for Interior Applications (PDF, 146.05 Kb)

    How It Works
    This round, die-cut fastener is designed to be screwed or riveted to a base where attachment is desired. It is supplied with a counter sunk hole for easy attachment using pan-head screws, pop-in rivets, or an ultrasonically stacked post. The head of the screw or rivet must be recessed below the bottom of the mushroom stems to allow proper engagement of the mushroom heads.

    The fastener has a rigid polypropylene backing that holds firm to the base through many openings and closings. The die-cut piece can be snapped to a second Dual Lock fastener attached to another part — forming a secure, dependable and repeatable attachment.

    When two pieces of 3M™ Dual Lock™ Reclosable Fasteners are pressed together, the stems flex and the mushroom heads slide past each other. After passing the opposing mating piece, the stems snap back into their original position and the opposing mushroom heads interlock. These fasteners can provide high tensile strength but can be opened by simply cleaving or peeling open the closure. Alignment and re-alignment is easy with no special tools required. This means that these fasteners can be used to attach components before they enter the final assembly plant, helping to reduce the number of parts and the length of assembly time.

    Stem Densities
    Combinations of stem densities and the engaged area provide adjustable and proportional engagement and disengagement force to meet application requirements. Dual Lock fasteners are offered in three different densities (stems per square inch): 170, 250, and 400. Dual Lock fastener SJ3763 has 400 stems per square inch (25mm), offering the tightest hold, and can be mated to Type 170 or 250.

    3M™ Dual Lock™ Reclosable
    400 stems/inch2 (62 stems/cm2)
    Recommended Applications
    3M™ Dual Lock™ Reclosable Fasteners can replace conventional mechanical fasteners in a wide range of assembly and attachment applications where reclosability or serviceability is desired. Dual Lock fasteners are used primarily to secure rigid and semi-rigid surfaces such as trim or door panels, instrument panel bezels, headliners, and other automotive interior and exterior trim. Other application examples include attaching accessories and equipment, window and door trim panels, sunroof rings and vibration and sound damping control.

    3M Science Delivers Closures You Can Count On
    3M™ Dual Lock™ Reclosable Fasteners are ideal for many applications where a high strength, reclosable fastening system is required. 3M engineers have uniquely combined physics and materials science to bring the automotive industry reliable fasteners that supply high performance even after exposure to high moisture levels and wide temperature ranges. For applications that require a pop-in piece and multiple closures, look no further than the long-lasting durability of the 3M™ Dual Lock™ Reclosable Fastener SJ3763. It is yet another outstanding example of how 3M technologies advance operations in the automotive industry, providing both ease of use and superior results.

    Learn more about 3M™ Dual Lock™ Reclosable Fasteners (PDF, 2.94 Mb)

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English