1. All 3M Products
  • 3M™ Dead-End Modular Kit 5815-D, 1/case
  • 3M™ Dead-End Modular Kit 5815-D, 1/case

    Part Number 5815-D3M ID 80610983175UPC 00054007042334
    • Dead-ends tape shield, wire shield, UniShield® and JCN cables
    • Modular design for future splice applications.
    • Accommodates wire size of 2 AWG to 750 kcmil (stranded) (Cu) and 2 AWG to 1000 kcmil (stranded) (Al)
    • Rated for 5 to 25 kV, 600 amp
     More...
    View Legal Disclaimer
    Specifications
    Attribute Name
    Value
    Current Rating
    600 Ampere
    Family
    3M™ Dead-End Modular Kit
    Product Series
    5815
    Product Type
    Splice
    RoHS 2011/65/EU Compliant
    Undetermined
    RoHS EU Comments
    Contact 3M for information
    *Important RoHS information
    Separable Connector Type
    Dead Break Elbows
    Splice Type
    Modular
    Details
    • Dead-ends tape shield, wire shield, UniShield® and JCN cables
    • Modular design for future splice applications.
    • Accommodates wire size of 2 AWG to 750 kcmil (stranded) (Cu) and 2 AWG to 1000 kcmil (stranded) (Al)
    • Rated for 5 to 25 kV, 600 amp
    • Includes 1 tee module, 2 dead-end plugs, 1 connecting stud, 1 instruction booklet and 1 silicone lubricant
    • Meets ANSI/IEEE Standard 386
    • 1 kit/case

    3M™ Dead-End Modular Kit contains all the accessories required for cable splicing. This kit contains 1 tee module, 2 dead-end plugs, 1 connecting stud and 1 silicone lubricant. The kit is rated for 5 to 25 kV and 600 amps industrial shielded power cables. The modular kit is suitable for operation in submerged locations.

    3M™ Dead-End Modular Kit includes 1 tee module, 2 dead-end plugs, 1 connecting stud, 1 instruction booklet and 1 silicone lubricant. This kit is for dead-end splicing with future add-on capability in a modular design that allows for splicing configurations. The dead-end plug provides a high impedance test point for safely checking the de-energized status of the circuit.

    Legal Disclaimer

    Manufacturing Origin: USA

    The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

    Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English