- Ideal 3M flap disc for medium-duty applications like weld removal and surface preparation
- Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
- Poly-cotton backing delivers controlled, even wear in medium unit pressure applications
- Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
Overall Diameter (Imperial)
Overall_Diameter_Imperial
Center Hole Diameter (Imperial)
Center_Hole_Diameter
Grit
Grit
63 Products Available
Available options:
Overall Diameter (Imperial), Center Hole Diameter (Imperial) and Grit
Specifications
|
Attribute Name
|
Value
|
|---|---|
|
Abrasive Material
|
Precision Shaped Ceramic
|
|
Alternative Sale Availability
|
6. This item is for industrial use only and there are no VOC restrictions.
|
|
Application
|
Deburring, Grinding
|
|
Backing Material
|
Poly-Cotton
|
|
Backing Weight
|
Y Weight
|
|
Bonding Type
|
Resin
|
|
Brand
|
Cubitron™ II
|
|
CA Metalworking Solutions Level 2
|
Castings and Forging, Deburring & Surface Conditioning, Weld Removal
|
|
Center Hole Diameter (Imperial)
|
0.625 in, 0.875 in
|
|
Center Hole Diameter (Metric)
|
15.875 mm, 22.225 mm
|
|
Center Hole Thread Size
|
3/8"-24, 5/8"-11
|
|
Color Family
|
Red
|
|
Disc Type
|
T27, T29
|
|
Equipment - Machines
|
Right Angle Grinders
|
|
For Use On
|
All Metals, Carbon Steel, Metal, Stainless Steel
|
|
Grit
|
40+, 60+, 80+
|
|
Industries
|
Metalworking
|
|
Maximum Speed
|
12000 rpm, 13300 rpm, 15000 rpm, 8600 rpm
|
|
Overall Diameter (Imperial)
|
4 in, 4.5 in, 5 in, 7 in
|
|
Overall Diameter (Metric)
|
101.6 mm, 114.3 mm, 127 mm, 177.8 mm
|
|
Product Color
|
Maroon
|
|
Product Form
|
Flap Disc
|
|
Substrate
|
All Metals, Carbon Steel, Stainless Steel
|
Product Details
- Ideal 3M flap disc for medium-duty applications like weld removal and surface preparation
- Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
- Poly-cotton backing delivers controlled, even wear in medium unit pressure applications
- Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
- Easy to use, with less gouging than fiber discs and bonded wheels
- Offers a great balance of fast cut and long life
3M™ Cubitron™ II Flap Disc 967A is ideal for medium-pressure applications on flat and contoured surfaces, especially in light deburring or weld leveling to prep for paint in mild steel. It’s also great for stainless steel fabrication where finish and gouge resistance are important. Powered by 3M Precision-Shaped Grain, this disc cuts fast and lasts long.
Ideal for medium-duty weld removal and surface prep
3M™ Cubitron™ II Flap Disc 967A — powered by 3M Precision-Shaped Grain and a poly-cotton backing — is well-suited for medium-duty applications including weld, scale and oxide removal, light deburring, surface preparation and blending. Along with the poly-cotton backing, this disc also features an incorporated grinding aid to help it run cool and cut efficiently on heat-sensitive metals. This all adds up to a disc that strikes a balance of fast cut and long life.
Individual flaps break down to expose fresh mineral
Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder (PDF, 4.70 Mb), flap discs allow you to breeze through a wide range of applications with less chance of gouging — even for less-experienced grinders.
Learn more about 3M™ Cubitron™ II Flap Discs (PDF, 2.33 Mb)
3M Precision-Shaped Grain out-cuts and outlasts conventional abrasive grain
3M™ Cubitron™ II Flap Disc 967A features our proprietary 3M Precision-Shaped — a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.
Applications
- Weld removal
- Light deburring
- Scale removal
- Oxide removal
- Surface prep
- Blending
Resources
Brochures
- 3M™ Abrasives for Right-Angle Systems Brochure PDF (PDF, 12.3MB)
- 3M™ Abrasives for Right Angle Tools Field Guide (PDF, 1.2MB)
- 61-5002-8424-7 Cubitron II Flap Disc Brochure (PDF, 2.3MB)
- 2019 Stainless Steel Finishing Brochure - Low Res (PDF, 1.0MB)
- 3M™ Cubitron™ II Flap Disc 967A Brochure LR PDF (PDF, 3.3MB)
Technical Papers
Customer Reviews
3M™ Cubitron™ II Flap Disc 967A is rated
out of
5 by
3.
Rated 5 out of
5
by
John c from
Tough as nails
Best flap disc ive ever run it will out perform any others on the market today
Date published: 2019-06-21
Rated 3 out of
5
by
LeeJames from
Performed well but way to expensive!
The 3M flap Disk is was sent to sample worked good but at best was only slightly better than the current Benchmark Abrasives discs I use and is 5 times the price?
Date published: 2019-04-09
Rated 4 out of
5
by
worksmart91 from
Helpful information, with useful details...
Have used 3M products. In the process of working with 3M; on various forms of fabrication work, the quality has been great.
Date published: 2015-03-17
Large Volume Order
