1. All 3M Products

3M™ Controlled-Flow Seam Sealer

Part Number 083293M ID 60455030571UPC 00051135083291
  • Two-part urethane technology offers tough, flexible performance
  • Good adhesion properties to primer or painted surfaces
  • Controlled application prevents excessive waste
  • Sealer flows 1 to 2 inches on non-level surfaces
 More...
Specifications
Attribute Name
Value
Adhesive Type
Urethane
Application
Roof Seams
Brand
3M™
Case Quantity
6 Eaches per Case
Color
Black
Consistency
Liquid
Consumer Label
Yes
Container Type
Cartridge
Number per Inner
1 per Each
Shelf Life in Months (From Date of Manufacture)
12
Volume
6.75 Fluid Ounce
Volume (Metric)
200 ml
Work Time
3 Minutes
Details
  • Two-part urethane technology offers tough, flexible performance
  • Good adhesion properties to primer or painted surfaces
  • Controlled application prevents excessive waste
  • Sealer flows 1 to 2 inches on non-level surfaces
  • Cured sealer will not shrink or crack

3M™ Controlled-Flow Seam Sealer offers considerable strength, flexes under torsional stress from vibration and withstands extreme weather. Our urethane formula contains no solvents and will not shrink or crack. These characteristics make it an ideal choice for automotive applications where motion and exposure to weather are a constant factor.

3M™ Controlled-Flow Seam Sealer uses two-part urethane technology to provide a tough flexible material for the sealing of joints on primed or painted substrates such as steel or aluminum enclosures.
Excellent for sloping areas
Tough, Flexible and Self-Leveling
3M™ Controlled-Flow Seam Sealer uses two-part urethane technology to provide a tough flexible material for the sealing of joints on primed or painted substrates such as steel or aluminum enclosures. 3M™ Control-Flow Seam Sealer works particularly well in areas where a flowable self-leveling type seam sealer is required. It is designed to flow one to two inches and then begins to cure, preventing further flow out of the material. This feature allows the user to control the application, preventing excessive waste while maintaining a uniform film thickness even on surfaces that are not level (PDF, 246 Kb). Typical product uses include automotive "roof ditch" applications where a flow grade sealer is required and some "trunk rain gutter" seams where the use of a standard "self-leveling" sealer is unacceptable due to flow characteristics.

Our urethane base auto body seam sealer has a paste consistency and is black/amber in color. This 3M seam sealer offers a 3 minute work time, cures in 2 hours and is ready for painting in about 40 minutes, depending on environmental conditions.

Directions for Use:
NOTE: 3M Best Practice is that all sealers, unless designated specifically for use on bare metal, be applied to properly prepared automotive paint or primer.

SURFACE PREPARATION:

NOTE: Apply only to surfaces primed with a 2K urethane, 2K epoxy primer, or clean, sanded paint. Acid etch primers should never be in direct contact with seam sealer.
  • Scuff primed surface with a Scotch-Brite™ General Purpose Hand Pad (Ultrafine), (PN 07448)
  • Blow off dust with clean, compressed air and wipe with a clean, dry rag
PRODUCT PREPARATION:
  • Insert cartridge into applicator gun
  • Remove retaining collar and plug from end of cartridge. Discard plug, save retaining collar
  • Extrude a small amount of product until both parts A and B dispense equally
  • Attach 3M™ Mixing Nozzle (PN 08193) to cartridge and lock in place with retaining collar
  • Dispense a small amount of material and discard
GENERAL REPAIR PROCESS:
  • Extrude sealer onto surface. Allow to cure a minimum of 40 minutes before beginning the painting process.
NOTE: If sealer is allowed to cure more than 24 hours, scuff the sealer prior to any painting steps.

3M Science Meets the Needs of Automotive Professionals
3M used the technical properties of two-part urethane to create a sealer that combines toughness with flexibility. This sealer is ideal for filling channels and drip rails on all types of vehicles and recreating puddle-type seams. It may also be used to seal water leaks in drip rails and channels.

Customer Reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 57ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Product Support

Specific product and application questions

SEND US A MESSAGE

Message Us

We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

All fields are required unless indicated optional.

  • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English