1. All 3M Products
  • 3M™ Cold Shrink Transition Splice Kit QS2012-3T-WS, Tape, Wire, UniShield®, EP-Lead or XLP-Lead, CN, JCN and PILC, 15 kV, 3/0 AWG-250 kcmil PILC and 4/0 AWG-500 kcmil poly/EPR, 1 kit/case
  • 3M™ Cold Shrink Transition Splice Kit QS2012-3T-WS, Tape, Wire, UniShield®, EP-Lead or XLP-Lead, CN, JCN and PILC, 15 kV, 3/0 AWG-250 kcmil PILC and 4/0 AWG-500 kcmil poly/EPR, 1 kit/case

    Part Number QS2012-3T-WS3M ID 80610982953UPC 00054007042112
    • Specially designed splice to connect a 3/C paper insulated lead covered (PILC) cable to three 1/C Poly/EPR insulated cables
    • Poly/EPR cables include CN, JCN, LC, tape shield, wire shield, poly/EP lead or UniShield® cables
    • Mastic components seal at Poly/EPR cable jacket ends
    • Poly/EPR cable has 0.88 to 1.36-in insulation O.D.
     More...
    Specifications
    Attribute Name
    Value
    Cable Shielding
    PILC
    Case Quantity
    1
    China RoHS - Below MCV
    Undetermined
    Connector O.D. Range
    0.70 - 1.02 Inch
    Connector O.D. Range (Metric)
    17.8 - 25.8 mm
    Maximum Connector Length
    5.2 inch (Al), 5.5 inch (Cu)
    Maximum Connector Length (Metric)
    132 mm (Al), 140 mm (Cu)
    Number of Conductors
    3
    PILC Cable Conductor Sizes
    250 kcmil, 3/0 AWG, 4/0 AWG
    Poly/EPR Cable Conductor Sizes
    250 kcmil, 350 kcmil, 4/0 AWG, 500 kcmil
    Poly/EPR Cable Conductor Sizes (Metric)
    120 - 240 mm²
    Poly/EPR Cable Insulation O.D. Range
    0.70 - 1.07 Inch
    Poly/EPR Cable Insulation O.D. Range (Metric)
    17.8 - 27.2 mm
    Product Series
    QS-2000-3T & QS-2000-3T-WS Series
    Product Technology
    Cold Shrink
    Product Type
    PILC Splice
    RoHS 2011/65/EU Compliant
    Undetermined
    Splice Type
    PILC Trifurcating
    Voltage
    15 kV
    Details
    • Specially designed splice to connect a 3/C paper insulated lead covered (PILC) cable to three 1/C Poly/EPR insulated cables
    • Poly/EPR cables include CN, JCN, LC, tape shield, wire shield, poly/EP lead or UniShield® cables
    • Mastic components seal at Poly/EPR cable jacket ends
    • Poly/EPR cable has 0.88 to 1.36-in insulation O.D.
    • Accommodates 4/0 AWG to 500 kcmil size Poly/EPR cable conductor
    • Silicone rubber-splice body controls the electrical field of the high voltage over the connector
    • Rated for 15 kV cables
    • Meets the requirements of IEEE 404 standards

    3M™ QS2011-3T-WS Series Cold Shrink Trifurcating Transition Splice Kit is a specially designed 15kV splice to connect a 3/C paper insulated lead covered (PILC) cable to three 1/C Poly/EPR insulated cables. Poly/EPR cables include CN, JCN, LC, tape shield, wire shield, poly/EP lead or UniShield® cables. It uses wraparound heat shrink rejacketing.

    3M™ QS2011-3T-WS Cold Shrink Trifurcating Transition Splice Kit includes 2 bags with components to seal oil inside and to seal the phase conductors of the PILC cable. The kit contains cold shrink splice bodies, an overall shield sleeve, heat shrink breakout boot, moisture sealing mastic materials, ground braid connectors, copper ground braids, resin and a heat shrink wraparound jacket sleeve. It is suitable to use on cables that can withstand a maximum temperature of 90 degrees C. The kit meets the requirements of IEEE 404 standards.

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English