1. All 3M Products
  • 3M™ Cold Shrink Transition Splice Kit QS2012-3T, CN, JCN, PILC, 15 kV, 3/0 AWG-250 kcmil PILC, 4/0 AWG-500 kcmil poly/EPR, 1/case
  • 3M™ Cold Shrink Transition Splice Kit QS2012-3T, CN, JCN, PILC, 15 kV, 3/0 AWG-250 kcmil PILC, 4/0 AWG-500 kcmil poly/EPR, 1/case

    Part Number QS2012-3T3M ID 80610981633UPC 00054007420224
    • Specially designed splice to connect a 3/C paper insulated lead covered (PILC) cable to three 1/C Poly/EPR insulated cables
    • Poly/EPR cables include CN, JCN, LC, tape shield, wire shield, poly/EP lead or UniShield® cables
    • Mastic strips effectively seal moisture around grounding braids, conductors or cable jackets
    • Poly/EPR cable has 0.88 to 1.36-in insulation O.D.
     More...
    Specifications
    Attribute Name
    Value
    Barrel Style
    Long Barrel
    Brand
    Scotchlok™
    Cable Shielding
    PILC
    Case Quantity
    1
    China RoHS - Below MCV
    Undetermined
    Color
    Red, Red
    Connector Base Metal
    Copper
    Connector O.D. Range
    0.90 - 1.30 Inch
    Connector O.D. Range (Metric)
    22.9-33.0 mm
    For Use With
    Copper Conductor Only
    Indoor/Outdoor
    Both
    Inside Diameter
    0.7 in
    Inside Diameter (Metric)
    17.8 mm
    Length
    4.13 in
    Length (Metric)
    104.8 mm
    Maximum Connector Length
    5.2 inch (Al), 5.5 inch (Cu)
    Maximum Connector Length (Metric)
    132 mm (Al), 140 mm (Cu)
    Maximum Operating Voltage
    35 Kilovolt
    Number of Conductors
    3
    Outer Diameter (Imperial)
    0.88 in
    Outside Diameter (Metric)
    22.2 mm
    PILC Cable Conductor Sizes
    250 AWG, 3/0 AWG, 300 kcmil, 350 kcmil, 4/0 AWG
    Poly/EPR Cable Conductor Sizes
    250 kcmil, 350 kcmil, 4/0 AWG, 500 kcmil
    Poly/EPR Cable Conductor Sizes (Metric)
    120 - 240 mm²
    Poly/EPR Cable Insulation O.D. Range
    0.88 - 1.36 Inch
    Poly/EPR Cable Insulation O.D. Range (Metric)
    22.0 - 34.6 mm
    Product Series
    11000, QS-2000-3T & QS-2000-3T-WS Series, QS2000-3T
    Product Technology
    Cold Shrink
    Product Type
    PILC Splice
    RoHS 2011/65/EU Compliant
    No
    RoHS EU Comments
    Contact 3M for information
    *Important RoHS information
    Splice Type
    PILC Trifurcating
    Voltage
    15 kV
    Details
    • Specially designed splice to connect a 3/C paper insulated lead covered (PILC) cable to three 1/C Poly/EPR insulated cables
    • Poly/EPR cables include CN, JCN, LC, tape shield, wire shield, poly/EP lead or UniShield® cables
    • Mastic strips effectively seal moisture around grounding braids, conductors or cable jackets
    • Poly/EPR cable has 0.88 to 1.36-in insulation O.D.
    • Accommodates 4/0 AWG to 500 kcmil size Poly/EPR cable conductor
    • Silicone rubber-splice body controls the electrical field of the high voltage over the connector
    • Rated for 15 kV cables
    • Meets the requirements of IEEE 404 standards

    3M™ QS2011-3T Series Cold Shrink Trifurcating Transition Splice Kit is a specially designed 15kV splice to connect a 3/C paper insulated lead covered (PILC) cable to three 1/C Poly/EPR insulated cables. Poly/EPR cables include CN, JCN, LC, tape shield, wire shield, poly/EP lead or UniShield® cables.

    3M™ QS2011-3T-WS Cold Shrink Trifurcating Transition Splice Kit includes 5 bags. Bag 1 includes a jacket tube, sheath seal mold, oil stop tube, folded inner sheath seal, mastic pads and Super 33+™ electrical tape. Bag 2 contains oil barrier tubes, splicing tape 130C, restricting tape and an outer sheath seal and shield to lead continuity straps. Bag 3 has splice bodies/jacketing tubes, shield sleeves and P55/R grease. Bag 4 includes mastic strips/tape/pads, U-shaped ground braids and springs. Bag 5 has resin 4, Armorcast wrap, springs and mastic pads. The kit meets the requirements of IEEE 404 standards.

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English