1. All 3M Products
  • 3M™ Cold Shrink Splice Kit QS2012T, CN, JCN, PILC, 15 kV, 3/0 AWG-350 kcmil PILC, 4/0 AWG-500 kcmil Poly/EPR, 1/case
  • 3M™ Cold Shrink Splice Kit QS2012T, CN, JCN, PILC, 15 kV, 3/0 AWG-350 kcmil PILC, 4/0 AWG-500 kcmil Poly/EPR, 1/case

    Part Number QS2012T3M ID 80610735864UPC 00054007505471
    • Oil stop tubes provide rejacketing and moisture-seal protection to the splice
    • Resists water and eliminate the need of sweat lead
    • Designed for PILC transition to the poly/EPR cable
    • Rated for 15 kV applications
     More...
    Specifications
    Attribute Name
    Value
    Brand
    3M™
    Cable Shielding
    PILC
    Case Quantity
    1
    Connector O.D. Range
    0.90 - 1.30 Inch
    Connector O.D. Range (Metric)
    23 - 51 mm
    Insulation Outer Diameter (Imperial)
    0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in, 0.79 in, 0.8 in, 0.81 in, 0.82 in, 0.83 in, 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in, 1.09 in, 1.1 in, 1.11 in, 1.12 in, 1.13 in, 1.14 in, 1.15 in, 1.16 in, 1.17 in
    Insulation Outer Diameter (Metric)
    18.796 mm, 19.05 mm, 19.304 mm, 19.558 mm, 19.812 mm, 20.066 mm, 20.32 mm, 20.574 mm, 20.828 mm, 21.082 mm, 21.336 mm, 21.59 mm, 21.844 mm, 22.098 mm, 22.352 mm, 22.606 mm, 22.86 mm, 23.114 mm, 23.368 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm, 26.924 mm, 27.178 mm, 27.432 mm, 27.686 mm, 27.94 mm, 28.194 mm, 28.448 mm, 28.702 mm, 28.956 mm, 29.21 mm, 29.464 mm, 29.718 mm
    Maximum Connector Length
    5.2 inch (Al), 5.5 inch (Cu)
    Maximum Connector Length (Metric)
    132 mm (Al), 140 mm (Cu)
    Number of Conductors
    1
    PILC Cable Conductor Sizes
    250 AWG, 3/0 AWG, 350 kcmil, 4/0 AWG
    PILC Cable Insulation O.D. Range
    0.74 - 1.17 Inch
    PILC Cable Insulation O.D. Range (Metric)
    18.8 - 29.7 mm
    Poly/EPR Cable Conductor Sizes
    250 kcmil, 350 kcmi, 4/0 AWG, 500 kcmil
    Poly/EPR Cable Insulation O.D. Range
    0.88 - 1.36 Inch
    Poly/EPR Cable Insulation O.D. Range (Metric)
    22.0 - 34.6 mm
    Product Series
    QS2000T Series
    Product Technology
    Cold Shrink
    Product Type
    PILC Splice
    RoHS 2011/65/EU Compliant
    Undetermined
    RoHS EU Comments
    Contact 3M for information
    *Important RoHS information
    Splice Type
    Inline PILC Transition
    Voltage
    15 kV
    Details
    • Oil stop tubes provide rejacketing and moisture-seal protection to the splice
    • Resists water and eliminate the need of sweat lead
    • Designed for PILC transition to the poly/EPR cable
    • Rated for 15 kV applications
    • Maintains resiliency and pressure even after years of aging and exposure

    The 3M™ Cold Shrink Splice Kit QS-2000T Series allows you to splice either single-conductor PILC cable to single-conductor PILC cable, or singleconductor PILC cable to single-conductor Poly/EPR cable. Because of the design of the splice, size transitions can also be accommodated rather easily. The 3M™ Cold Shrink Splice Kit QS-2000T Series meets the requirements of IEEE 404.

    This kit allows you to splice either single conductor PILC cable to single conductor PILC cable, or single conductor PILC cable to single conductor Poly/EPR cable. Because of the design of the splice, size transitions can also be accommodated rather easily. Each kit makes one single conductor splice. Use 3M™ Scotchlok™ Connectors 2000T Series with these splice kits. Each kit contains sufficient quantities of material to make one splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English