1. All 3M Products
  • 3M™ Cold Shrink Single-Conductor Transition Joint QS-III, 5537A-IT-PILC kit€
  • 3M™ Cold Shrink Single-Conductor Transition Joint QS-III, 5537A-IT-PILC kit€

    Part Number 5537A-1T-PILC3M ID 80611438039UPC 00051128572030
      • Silicon rubber-splice body offers good high- and low-temperature performance
      • The cold shrink jacket provides physical protection and environmental sealing
      • Designed for PILC transition to the poly/EPR cable
      • 1.57 to 2-in O.D. insulation
       More...
      Specifications
      Attribute Name
      Value
      Cable Shielding
      PILC
      Connector O.D. Range
      1.0 - 1.85 Inch
      Connector O.D. Range (Metric)
      25.4 - 47.0 mm
      Maximum Connector Length
      7.5 inch (Al), 8.25 inch (Cu)
      Maximum Connector Length (Metric)
      190.5 mm (Al), 209.6 mm (Cu)
      Number of Conductors
      1
      PILC Cable Conductor Sizes
      1000 kcmil (100% Only), 500 kcmil, 750 kcmil, 900 kcmil
      PILC Cable Insulation O.D. Range
      1.57 - 2.00 Inch
      PILC Cable Insulation O.D. Range (Metric)
      39.9 - 50.8 mm
      Poly/EPR Cable Conductor Sizes
      1000 kcmil, 500 kcmil, 750 kcmil
      Poly/EPR Cable Insulation O.D. Range
      1.24 - 2.70 Inch
      Poly/EPR Cable Insulation O.D. Range (Metric)
      31.5 - 52.6 mm
      Splice Type
      Transition
      Voltage
      35 kV
      Details
      • Silicon rubber-splice body offers good high- and low-temperature performance
      • The cold shrink jacket provides physical protection and environmental sealing
      • Designed for PILC transition to the poly/EPR cable
      • 1.57 to 2-in O.D. insulation
      • Accommodates wire size of 500 to 1000 kcmil
      • Rated for 35 kV applications
      • Provides high-ampacity shielding where fault current rated for 25000 A and neutral current rated for 350 A
      • Includes copper foil shielding tape 1181, electrical stress-control tape 2220, white restricting tape and more
      • IEEE Approved
      • 1 kit/case

      3M™ 5530A-1T-PILC Series Cold Shrink QS-III Transition Splice Kit is a 35 kV-class inline splice that is designed for transition of PILC to poly/EPR cable. The cold shrink design ensures a quick installation and excellent cable size transitions.

      3M™ 5530A-1T-PILC Series Cold Shrink QS-III Transition Splice Kit includes a splice body, foldback jacket tube, P55/R compound, shielding sleeve, oil barrier tube, semi-conductive tube and more. The splice body is a 1-piece design made of specially formulated silicone rubber for long-term sealing. The special electrode design reduces electrical stress at the critical cable/splice interface. It has a computer-aided design that provides a compact size and optimal distribution of the electrical field. This kit is perfect to use with wire-shielded cable, CN cable, JCN cable and more. IEEE Approved.

      Follow Us
      The brands listed above are trademarks of 3M.
      Change Location
      United States - English