1. All 3M Products
  • 3M™ Cold Shrink Insulator 8424-8P, 1-1/0 AWG, 10/Case - Point of purchase
  • 3M™ Cold Shrink Insulator 8424-8P, 1-1/0 AWG, 10/Case - Point of purchase

    Part Number 8424-8P3M ID 80610928352UPC 00054007428657
    • Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
    • Simple installation which requires no tools
    • Sealing of terminal lug barrels, conduit couplings and conduit-to-cable breakouts
    • Made of black EPDM rubber
     More...
    View Legal Disclaimer
    Specifications
    Attribute Name
    Value
    Brand
    3M™
    Cable Shielding
    Non-shielded, Tape Shield, UniShield®, Wire Shield
    Cable Type
    Power Cable
    Case Quantity
    10
    Conductor Material
    Aluminum, Copper
    Conductor Size Range
    10-1/0 AWG
    Conductor Sizes
    1 AWG, 1/0 AWG, 10 AWG, 2 AWG, 4 AWG, 6 AWG, 8 AWG
    Inner Diameter After Shrink (Imperial)
    0.1 in
    Inner Diameter Before Shrink (Imperial)
    0.82 in
    Maximum Connector Length
    3.0 in
    Maximum Connector Length (Metric)
    76.2 mm
    Number of Conductors
    1
    Product Type
    Splice
    RoHS 2011/65/EU Compliant
    Yes
    RoHS EU Comments
    RoHS 2011/65/EU compliant without exemption
    *Important RoHS information
    Splice Type
    Cold Shrink
    Voltage
    1 kV
    Details
    • Specially designed for primary insulation of solid dielectric insulated wires and cable splicing rated to 1000 volts
    • Simple installation which requires no tools
    • Sealing of terminal lug barrels, conduit couplings and conduit-to-cable breakouts
    • Made of black EPDM rubber
    • Made of EPDM rubber which contains no chlorides or sulfur
    • Withstands temperatures of -40 to 194 degrees F (-40 to 90 degrees C)
    • Environmental sealing for communication and other non-electrical applications

    3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40–194°F (-40–90°C). The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV. Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications. Important: Use insulation jacket or connector O.D. for final ordering criteria. * Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be used as primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length: 5.625” “Point of Purchase” packaging designated by “P”. Example: 8423-6P

    Legal Disclaimer

    Manufacturing Origin: USA

    The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

    Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English