1. All 3M Products

3M™ Channel Bonding and Sidelite Adhesive

Part Number 086413M ID 60455052443UPC 00051135086414
  • Epoxy for bonding glass to metal or plastic on vehicles
  • Recommended for either stationary or movable glass applications
  • Rapidly curing epoxy gets a car ready for the road sooner
  • Black color maintains O.E.M. appearance
 More...
Specifications
Attribute Name
Value
Adhesive Type
Two-Part Epoxy
Brand
3M™
Case Quantity
6 Bags per Case
Color
Black
Consistency
Paste
Consumer Label
Yes
Container Type
Cartridge
Cure Time
24 Hours
Handling Time
1-2 hours
Number per Inner
1 per Cartridge
Shelf Life in Months (From Date of Manufacture)
12
Work Time
10 Minutes
Details
  • Epoxy for bonding glass to metal or plastic on vehicles
  • Recommended for either stationary or movable glass applications
  • Rapidly curing epoxy gets a car ready for the road sooner
  • Black color maintains O.E.M. appearance

3M™ Channel Bonding and Sidelite Adhesive securely bonds glass in both stationary and movable applications on automobiles. Our high-performance, two-component black epoxy adhesive is both flexible and durable when bonding impervious surfaces such as glass to metal or plastic. This adhesive is black in color.

 

3M™ Channel Bonding and Sidelite Adhesive
3M™ Performance Manual Applicator
3M™ Channel Bonding and Sidelite Adhesive creates a secure bond between glass and other impervious materials such as metal or plastic.
3M™ Static Mixing Nozzle
3M™ Channel Bonding and Sidelite Adhesive creates a secure bond between glass and other impervious materials such as metal or plastic. Our two-part, black epoxy adhesive is rated for bonding both movable and stationary glass into place. This rapidly curing adhesive has a work time of 5 minutes, a clamp time of 1 hour and a cure time of 24 hours under typical environmental conditions. The quick-curing properties of this adhesive is a benefit compared to the hours or even days it often takes for one-part sealers and adhesives. The black color of the adhesive maintains the desired O.E.M. appearance.

Apply this adhesive with a 3M™ Performance Manual Applicator (part number 08190) and 3M™ Static Mixing Nozzle (part number 38191). This comprehensive mixing and application system provides precise placement of adhesive with no waste and more time savings.

PRECAUTIONARY INFORMATION:
Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information. Note: Laws controlling the acceptable amounts of Volatile Organic Compounds (VOC's) vary by state, and in some cases by locality. For surface preparation and clean-up activities, consult federal, state and local regulations regarding use of products containing VOCs in your area.

Typical Performance Properties:
The following times have been determined with ambient air temperature and substrate temperature @ 70°F (21°C) and are considered typical values.
  • WORK TIME: 5 minutes
  • MIX NOZZLE DWELL TIME: 3.5 minutes
  • HANDLING/CLAMP TIME: 1 hour
  • CURE TIME: 24 hours
Directions for Use:
  • Preparation: Clean the side glass channel of dirt, oil, grease and moisture dry thoroughly. When bonding to a metal channel, first remove all rust. For optimum adhesion and corrosion resistance, prime all metal surfaces prior to applying seam sealer(s). If an acid-etch (self-etching) primer is used, a 2K epoxy or urethane primer must be applied before the application of the adhesive.
  • Clean the window glass of all dirt, oil grease and moisture using glass cleaner. Dry thoroughly.
  • If repairing a movable glass position the glass properly in the glass run channel and tape in place in the up position. If stationary glass prepare the pinch weld area as necessary, (be sure to pre-fit all parts prior to applying the adhesive).
  • Insert the cartridge into the applicator gun, remove the cap from the cartridge and dispense a small amount of adhesive until both parts A and B dispense equally.
  • Attach the mixing nozzle and dispense a small amount of adhesive through the mixing nozzle.
  • Apply the adhesive to one of the parts and assemble the parts within 3 minutes.
  • If bonding a movable glass leave the glass in the up position for 24 hours before using. If bonding a stationary glass fixture in place for 1 hour before using.
CLEAN UP:
Unmixed material may be cleaned from most surfaces with an appropriate VOC compliant product.
 

 

Customer Reviews
3M™ Channel Bonding and Sidelite Adhesive is rated 2.0 out of 5 by 5.
Rated 3 out of 5 by from Worked well for me, however... I used this to adhere the glass back in place the track of my truck. It worked well and I am happy with the end results but I had to rig up a cualk gun to use it. The tool you need to use this is more expensive than the epoxy. Another problem they only send one mixing tube in the package so make sure you buy extras if you intend on using it again.
Date published: 2018-07-04
Rated 1 out of 5 by from Poor product. Does not work on side windows. Bought this product to adhere the side glide to the plastic clip. Product does not cure and remains tacky. Windows easily pulls up from the clip. Don't waste you money for mounting on anything.
Date published: 2018-06-24
Rated 1 out of 5 by from Poor product The product may be fine, however applying it from the tube/s is virtually impossible. Why on earth does this not come with a plunger device which would make it work. I would no reccomd purchasing this product.
Date published: 2018-05-29
Rated 4 out of 5 by from So far, so good Seems to be holding well. I did have to buy a gun to apply it, but now I have the gun for similar products.
Date published: 2018-01-21
Rated 1 out of 5 by from Didn't work for me It cost way to much. It didn't hold. The epoxy leaked out of the back. I needed a special caulk gun. It was a waste of $27.00 and a day of prep.
Date published: 2017-08-19
  • y_2019, m_10, d_20, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_B40066536|3m-country-catalog|FUZEexperience|en_US, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_3m-country-catalog
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 51ms
  • REVIEWS, PRODUCT
Product Support

Specific product and application questions

SEND US A MESSAGE

Message Us

We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

All fields are required unless indicated optional.

  • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

    Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
United States - English