3M Supplied Air Systems for Worker Health & Safety

• This supplied air respirator assembly, when used with approved headgear, breathing tube, and air line, can help regulate the flow and temperature of supplied air system.
• Cools the incoming compressed air up to 50F (28C).

See how it works

• This assembly helps regulate the flow and temperature of the supplied air.
• It keeps the worker comfortable by heating the incoming air by as much as 50F (28C).

• Allows the worker to adjust the airflow to a comfortable level.
• Includes the valve and waist belt.
• It is strictly a regulator and will not warm or cool supplied air to the worker.

• The V-112 pad allows certain assemblies to be worn vertically or horizontally on the belt.
• The pad provides cushioning, and thermal insulation from the surfaces of the cooling or heating tubes.

• This hose is available in 25 feet, 50 feet, and 100 feet lengths and has a 3/8 inch inner diameter.
• It is equipped with MPT fittings at both ends and accepts 1/4 inch FPT fittings.
• Can combine up to three W-9435 airlines, not to exceed 300 feet.

• Can be used on 3M™ High Pressure Compressed Air Systems.
• This hose is available in 25 feet, 50 feet, and 100 feet long and has a 3/8 inch inner diameter.
• It is equipped with MPT on both ends to accept 1/4 inch FPT fittings.
• Coiled hoses should be used in single length only. They cannot be combined.

This four stage air purification system includes an adjustable regulator and gauge. Used in applications such as painting, petroleum industries, pharmaceuticals, chemical handling and metal grinding.

Available in four or eight outlet panel that filters and monitors carbon monoxide (CO).

This panel is designed to filter and regulate air being delivered to the supplied air respirator. It has a maximum capacity of 50 cfm at 105 psi. This is an economical system that provides single stage filtration. It is designed to be permanently mounted to the wall.

Note: This unit will NOT remove carbon monoxide (CO) from compressed air source.

This carbon monoxide (CO) monitor is designed to connect directly to the 3M™ Compressed Air Filter and Regulator Panel W-2806.