1. All 3M Products
  • 3M™ Cold Shrink Quick Splice Low Voltage QSLV-M 8-2/0, Non-shielded, 1 kV, 10/Case
  • 3M™ Cold Shrink Quick Splice Low Voltage QSLV-M 8-2/0, Non-shielded, 1 kV, 10/Case

    Part Number QSLV-M(8-2/0)3M ID 80611438369UPC 00051128572368
    • Rubber sleeve with sealing mastic provides a water-resistant sealing
    • Factory-expanded for easy installation
    • For direct-bury, secondary low-voltage, non-shielded cable splices
    • Rated for up to 1 kV applications
     More...
    View Legal Disclaimer
    Specifications
    Attribute Name
    Value
    Brand
    3M™
    Cable Outside Diameter (Metric)
    19 mm
    Cable Shielding
    Non-shielded
    Cable Type
    Power Cable
    Color
    Black, Black
    Conductor Material
    Aluminum, Copper
    Conductor Size Range
    10 - 70 mm²
    Conductor Sizes
    1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 4 AWG, 6 AWG, 8 AWG
    Connector Included
    No
    Connector Maximum Outside Diameter
    0.687 in
    Dielectric Strength (V/mil)
    365 V/mil
    Elongation
    750 %
    Indoor/Outdoor
    Both
    Insulation O.D. Range
    0.20-0.75 in
    Insulation O.D. Range (Metric)
    5-19 mm
    Maximum Connector Length
    2.50 in
    Maximum Connector Length (Metric)
    63 mm
    Model
    Cold Shrink
    Number of Conductors
    3
    Product Type
    Splice
    RoHS 2011/65/EU Compliant
    Yes
    RoHS EU Comments
    RoHS 2011/65/EU compliant without exemption
    *Important RoHS information
    Splice Type
    Cold Shrink
    Voltage
    1 kV
    Voltage Rating
    0.6/1 kV
    Details
    • Rubber sleeve with sealing mastic provides a water-resistant sealing
    • Factory-expanded for easy installation
    • For direct-bury, secondary low-voltage, non-shielded cable splices
    • Rated for up to 1 kV applications
    • Splices both aluminum and copper conductors
    • RoHS 2011/65/EU Compliant and ANSI Certified

    3M™ Cold Shrink Quick Splice Low Voltage QSLV-M are open-ended tubular rubber sleeves with sealing mastic on each end which are factory expanded and assembled onto a unique three-core system. Two cores, one on each end, are removed after the QSLV-M insulator has been centered over an inline connector, allowing the ends of the tube to shrink and form a water-resistant seal. The third, center segment of the core remains inside the cold shrink tube, acting as a support structure. Sizing of the cores and tube, along with the sealing mastic on each end, is designed to accommodate the variance in connectors and connector crimping techniques and final dimensions without degrading the seal and insulating characteristics of the EPDM rubber tube, while also making core removal easy. Two diameter sizes will cover a range of 1 kV or less cable from 8 AWG through 1000 kcmil for copper and 8 AWG through 500 kcmil for aluminum conductors with crimped connectors. In aerial applications where intense UV radiation will be common and visual inspection is not possible, it is recommended to overwrap the tubing with Scotch® Super 33+™ Vinyl Electrical Tape or Scotch® Self-Fusing Silicone Rubber Electrical Tape 70. Note: Insulator may be used on cable sizes outside of the recommended range provided both cables are within the insulation O.D. range, and the connector meets the dimensional requirements shown in the table.

    Legal Disclaimer

    Manufacturing Origin: USA

    The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

    Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English