1. All 3M Products
  • 3M™ Dirt Trap Protection Material Dispensers
  • 3M™ Dirt Trap Protection Material Dispensers

    Part Number 368623M ID 60455050371UPC 00051131368620
    • Designed for use with 3M™ Dirt Trap Protection Material Applicators
    • Conveniently dispenses 3M™ Dirt Trap Nonwoven Protection Material
    • Available for wall and floor applicators
    • High-strength magnets secure unit on vertical metal surfaces
     More...
    Specifications
    Attribute Name
    Value
    Application
    Paint Application, Paint Preparation
    Brand
    3M™
    Color
    Red
    Overall Length (Imperial)
    24.25 in
    Overall Length (Metric)
    615.95 mm
    Overall Width (Imperial)
    12 in
    Overall Width (Metric)
    30.48 cm
    Product Type
    Dispenser
    Details
    • Designed for use with 3M™ Dirt Trap Protection Material Applicators
    • Conveniently dispenses 3M™ Dirt Trap Nonwoven Protection Material
    • Available for wall and floor applicators
    • High-strength magnets secure unit on vertical metal surfaces
    • Magnets allow moving dispenser to new locations
    • Durable metal construction for use in automotive paint shops

    3M™ Dirt Trap Nonwoven Protection Material Dispensers conveniently store and dispense 3M™ Dirt Trap Nonwoven Protection Material. Choose the 3M™ Dirt Trap Material Dispenser, PN36862 or 3M™ Dirt Trap Material Floor Applicator Dispenser, 36864 for smooth, roll-out access to protection material for application to paint booth walls and floors.

     

    3M™ Dirt Trap Magnetic Protection Material Dispenser
    Reduce cleanup time and surface damage

    Designed for use with 3M™ Dirt Trap Protection Material Applicators, our 3M™ Dirt Trap  Protection Material Dispensers make it easy to unroll just the right length of 3M™ Dirt Trap Protection Material (sold separately) for smooth application without folds or ripples. Metal dispensers are durable and easy to use - simply place the dispenser where desired and smoothly unroll the material. 3M™ Dirt Trap Material Floor Applicator Dispenser, pN 36864 is fully portable for applying protection material to paint booth. Both the floor dispenser and the 3M™ Dirt Trap Material Dispenser, PN 36862 feature high strength magnets that secure it on vertical metal surfaces. The magnets allow relocating the dispenser to another site if desired.

    About 3M™ Dirt Trap  Nonwoven Protection Material
    3M™ Dirt Trap Nonwoven Protection Material (PDF, 1.7 Mb) is specially engineered to protect paint booth walls and floors, trap dust and overspray, and brighten work areas. The material can also be used to help protect other surfaces such as table tops, paint scales, paint mixing room walls and floors, prep bay areas and more.

    This adhesive-backed, nonwoven material features a breakthrough innovation that actually traps dust, dirt and overspray, decreasing airborne particles in the paint booth or prep station and keeping them out of paint finishes..The white color brightens the room, allowing for better visibility for color matching and verifying coverage during the application of paint products.

    Its adhesive backing provides cling to vertical surfaces, eliminating the need to fasten it with tape or other attachment methods. The low tack adhesive is specially formulated to release when pulled by hand, allowing easy removal of material coated with paint overspray, dust or dirt. What's revealed underneath is a clear and clean wall or floor.
     

    3M™ Dirt Trap Protection Material Dispenser conveniently stores and dispenses 3M™ Dirt Trap Protection Material.
    Promote worker safety with chemical-free cleaning
    Directions for installing 3M™ Dirt Trap Nonwoven Protection Material on walls
    1. Install the first section closest to the floor
    2. Attach the dispenser to the adjacent wall
    3. Pull the fabric out the length of the booth
    4. Use the squeegee to attach the far end of the material at the corner
    5. Work your way back to the dispenser aligning the material and attach to the wall
    6. Cut the material at the dispenser
    7. Squeegee the entire wall section to make sure it is attached completely
    8. Re-mount the dispenser at the level of the second section
    9. Overlap the first section (1" or less)
    10. Use the same method to finish installing 3 wall sections
    11. After the third section is installed, cut out around the windows and light
    12. Important — Material should be replaced prior to 150 bake cycles for clean and easy removal
    Directions for installing 3M™ Dirt Trap Nonwoven Protection Material on floors
    • Attach the dispenser to the end wall for the floor installation
    • Pull out the material and align the first floor section close to the wall
    • Continue installing sections as needed
    • The dispenser may also be placed on the floor for dispensing
    • Important — Avoid covering the floor grate (material may restrict air flow)
     

     

     

     

    Customer Reviews
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 17ms
    • REVIEWS, PRODUCT
    • bvseo-msg: The resource to the URL or file is currently unavailable.;
    Product Support

    Specific product and application questions

    SEND US A MESSAGE

    Message Us

    We welcome your questions and comments about 3M Products and only use the information you provide to respond to your message.

    All fields are required unless indicated optional.

    • The information you provide on this Contact Us form will be used to respond to your request and as further described in our  Internet Privacy Policy.

      Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use the Contact Us system.

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United States - English