1. All 3M Products
3M Nigeria

3M™ Scotch-Weld™ Acrylic Adhesive DP807 47ml

3M ID 62329014351
  • High shear and peel strengths ensures a tough, durable, and permanent bond
  • Fast build-up and 5 minute work life sets in under ten minutes at room temperature
  • Ideal for industrial applications by bonding hard-to-adhere substrates with minimal surface preparation, such as most plastics and lightly oily metal
  • Moderate non-sag formula ensure adhesive won't slump or spread excessively
 More...
Specifications
Adhesive Type
Acrylic
Brand
Scotch-Weld™
Consumer Label
No
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Full Cure
4-24 Hours @ 73 F (23 C)
Hardness
70 Shore D
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Signage, Specialty Vehicle, Transportation, Woodworking
Mix Ratio Volume Base:Accelerator
1 : 1
Open Time
5 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge
Product Type
Acrylic Adhesive
Shear Strength at 72 Degrees F (22 Degrees C)
3700 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
12
Specific Gravity
0.97
Storage Temperature
72 Degree Fahrenheit
Substrate 1
Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Wood & Hardboard
Substrate 2
Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Wood & Hardboard
Units per Case
12
Viscosity Range (cps) at Room Temperature
50,000
Volume (metric)
47 mL
Details
  • High shear and peel strengths ensures a tough, durable, and permanent bond
  • Fast build-up and 5 minute work life sets in under ten minutes at room temperature
  • Ideal for industrial applications by bonding hard-to-adhere substrates with minimal surface preparation, such as most plastics and lightly oily metal
  • Moderate non-sag formula ensure adhesive won't slump or spread excessively

3M™Scotch-Weld™ Acrylic Adhesive 807 is an acrylic adhesive with high overlap shear and peel strength with good impact resistance and durability. This adhesive bonds well to many metals, woods and most plastic surfaces with minimal surface preparation.

Adheres with Minimal Preparation 3M™ Scotch-Weld™ Acrylic Adhesive 807 is able to perform on the most difficult surfaces, even with minimal surface preparation. It offers good shear and peel strength and that makes it ideal for industrial applications where permanent, high-strength bonding of similar and dissimilar surfaces is a requirement. It will effectively bond wood, ceramic, plastic and most metals. Our 3M™ Scotch-Weld™ Acrylic Adhesive 807 offers a non-sag, moderate viscosity formula that won't slump or sag excessively when applied, allowing for precise application while ensuring your adhesive remains directly where you apply it, even on vertical surfaces. Recommended Applications Joining Bonding Gluing Assembling Sealing Two Parts, One Common Bond The mix ratio is 1:1 for quick, precise dispensing, and with a three- to five-minute working time there's some opportunity for repositioning. The adhesive reaches handling strength in approximately 20-minutes and is fully cured in 24 hours (at 72°F/22°C). Easy Adhesion with Acrylic Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although generally slightly lower than epoxy adhesives. However, they have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.

Follow Us
The brands listed above are trademarks of 3M.
Change Location
Nigeria - English