1. All 3M Products
  • 3M™ Trizact™ PSA Film Disc Roll 568XA, 5 in x 5/8 in x 100 in
  • 3M™ Trizact™ PSA Film Disc Roll 568XA, 5 in x 5/8 in x 100 in

    3M ID 60010021602
    • Adhesive backing for easy attachment
    • Convenient disc roll form
    • Durable film backing
    • Use wet for glass defect repair and solid surface finishing
     More...
    Specifications
    Attachment Type
    PSA
    Backing Material
    Film
    Brand
    Trizact™
    Center Hole Diameter (Metric)
    15.748 mm
    Coat Type
    Closed Coat
    Form Type
    Liner
    Industries
    Composite, Marine, Woodworking
    Mineral Type
    Cerium Oxide
    Position
    Better
    Primary Application
    Woodworking, Composite & Advanced Materials
    Product Form
    Disc Roll
    Product Details
    • Adhesive backing for easy attachment
    • Convenient disc roll form
    • Durable film backing
    • Use wet for glass defect repair and solid surface finishing

    3M™ Trizact™ PSA Film Disc Roll 568XA is a cerium oxide PSA disc roll with a durable film backing. Our 568XA discs feature Trizact micro-replicated minerals, an adhesive backing for easy attachment, and comes in a convenient disc roll format.

    Finish and Repair Sensitive Surfaces 
    Designed with Trizact microreplicated cerium oxide, 568XA ensures a fast, consistent cut rate that easily removes defects such as scuffs, scratches and acid marks on table glass, airplane windscreens and windows, architectural glass and other solid surfaces. The film backing is water resistant and requires little water for touch-up, minimizing mess and processing steps.

    Convenient PSA Disc Rolls Minimize Downtime
    Our 3M™ Trizact™ PSA Film Disc Roll 568XA provides multiple adhesive-backed discs on a single roll of liner. This makes them easy to peel off one at a time, efficient to store and economical. The pressure sensitive adhesive coating on the backs is quick and simple to use – simply press the disc onto the backup pad and you’re ready to go. They remove just as cleanly, leaving an uncontaminated surface for the next disc

    About Cerium Oxide
    Cerium oxide is an oxide of the rare earth metal, cerium. The average grain size of the particle is measured in nanometers in raw form, thus making it one of the most effective abrasives for final polishing steps on solid surfaces. It is heat resistant and effective as a polishing agent for glass mirrors, plate glass, crystal, ophthalmic lenses, precision optics and precious and semiprecious stone 

    Trizact Abrasives
    3M™ Trizact™ abrasives are engineered using 3M microreplication — the creation of microscopic 3-dimensional structures applied to a backing in a uniform and precise pattern. These pyramid-like structures contain multiple layers of mineral. When they break down during use, fresh cutting mineral continues to be exposed so results are consistent throughout the life of the abrasive.

    Ongoing sharp cutting action contributes to higher throughput, more uniform results and greater productivity.

    Polishes and Leaves Glass Crystal Clear
    Use 3M™ Trizact™ 568XA discs for a final polish. First, wet the surface slightly with a small amount of water. As you polish, the mineral "pyramids" will break down to form a slurry-like solution. The polishing action that occurs will remove scratches left by previous leveling steps.

    For acrylic-filled solid surfaces, use 568XA damp as a final step to attain a high-gloss finish.

    Remove silica coatings (anti-glare and static) and fluoric acid spots in a single step with 568XA.