3M™ Scotchkote™ Epoxy Coating 323i

3M ID 80630001800
  • Get excellent corrosion protection for steel pipes and metal substrates
  • Excellent adhesion
  • High build, up to 45 mils, in one application
  • Can be applied to a substrate as cold as 41°F/5°C
 More...
View all details
Product Details

3M™ Scotchkote™ Liquid Epoxy Coating 323/323i is a two part system designed to protect steel pipe and other metal substrates from the harsh affects of corrosion.

Provide excellent corrosion protection to steel pipes and metal substrates, with 3M™ Scotchkote™ Pipe Coating 323. Our two-part system can be used as a joint coating, refurbishing coating or pipe coating. The cured coating withstands pigging operations in use, for significant benefits to product pumping costs. It can be applied by hand, using a brush or roller. General application steps when using our product: 1. Remove oil, grease, and loosely adhering deposits 2. Verify the air temperature is 3°C above the dew point 3. Abrasive blast clean surface to NACE #2/SSPC-SP10, ISO 8501:1 SA-2 1/2 near white metal 4. With air hose, clean blasted surface of any abraded debris then verify anchor profile is 2-4 mils/50-100 microns 5. With the substrate between 5°C and 93°C dew point 3°C below air temperature, apply Scotchkote™ Liquid Epoxy Coating 323/323i at minimum film of 25 mil/ 625 microns 6. Apply Scotchkote™ 323/323i as soon as possible after blasting but no more than 4 hours 7. Allow to cure per time and temperature chart provided 8. Visually or electrically inspect the coating for defects 9. Repair all defects using Scotchkote™ 323/323i as repair material Our pipe coating system comprising of: 3M™ Scotchkote™ 323, 450 ml, Application Gun (1 each) 90 Degree Spray Nozzle (24/box) 450 ml Mix Nozzles (24/box) Straight Spray Nozzle (24/box) Liquid Epoxy Coating Cartridges, 323i, 50ml Mixing Nozzle for 50ml Cartridge of 323i Application Gun, manual for 323i

  • Get excellent corrosion protection for steel pipes and metal substrates
  • Excellent adhesion
  • High build, up to 45 mils, in one application
  • Can be applied to a substrate as cold as 41°F/5°C
  • Resistant to damage from acids and bases in pH range 2-14
  • Resistant to hydrocarbons such as crude oil, motor oils and gasoline
  • Applicable by cartridge, brush, roller, HSS or plural component spray
  • 2A:1B Volumetric Mix Ratio
Contact Us

Send Us a Message

Thank you for your interest in 3M. In order to help us manage and respond to your query effectively, we politely ask you to provide some key information, including your contact details. The information you provide will be used to respond to your request through email or telephone by a 3M representative or one of our authorised business partners with whom we might share your personal information consistent with the 3M privacy policy

  •  
  •  
  •  
  •  
  •  
  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Send Message

Thank you for your contacting 3M

We have received your message and are now looking into your enquiry
One of our representatives will get in touch with you by phone or email

An error occurred.