1. Lebanon
  2. All 3M Products
  • 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015 White 610 mm x 23 m, 0.38 mm
  • 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015 White 610 mm x 23 m, 0.38 mm

    • White, flexo plate mounting tape with air release feature adhesive
    • 0.38 mm thickness
    • Standard density
    • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
     More...
    View all details
    Product Details
    • White, flexo plate mounting tape with air release feature adhesive
    • 0.38 mm thickness
    • Standard density
    • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
    • Print plates mounted on E1015 will have no air bubbles under the plate due to the air release feature designed into the tape
    • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
    • Plate easily demounts from the double coated cushioned tape without adhesive residue
    • Tape also removes cleanly from the sleeve or steel print cylinder
    • Flexographic printing, flexographic printers
    • Cushioned flexographic plate mounting sticky back foam tape

    Mount your photopolimeric plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015. Our 0.38 mm white, double coated foam tape has the air release feature with easy plate side removal. It is used for combination jobs.

    3M™ Cushion-Mount™ Plus Plate Mounting Tape E1015 with easy mount adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality standard combination print, and is suitable for combination of solids and tone reproduction where solids and process are equally important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.