1. All 3M Products
3M Lebanon
  • 3M™ Urethane Foam Tape 4108 Natural, 1 in x 36 yd 30.0 mil, 9 per case
  • 3M™ Urethane Foam Tape 4108 Natural, 1 in x 36 yd 30.0 mil, 9 per case

    3M ID 70002488057
    • Natural, 0.125 in. (3 mm) firm, high-density open-cell foam design helps trap moisture, dust and contaminants
    • Allows air or gas vapors to pass through for a breathable seal
    • Dampens sounds and absorbs vibration when used in electronic applications
    • Excellent cushioning characteristics and high absorbency
     More...
    Specifications
    Adhesive Type
    Acrylic
    Backing Material
    Urethane Foam
    Backing Thickness (metric)
    0.08 mm
    Carrier Material
    Urethane
    Elongation at Break
    0.8 Percent
    Foam Type
    Firm
    Indoor/Outdoor
    Indoor/Outdoor
    Industries
    General Industrial
    Maximum Operating Temperature (Celsius)
    93 Degree Celsius
    Overall Height (Metric)
    0.8 mm
    Overall Length (Metric)
    32.9 m
    Overall Width (Metric)
    2.5 cm
    Primary Liner
    Silicone Treated Paper
    Primary Liner Color
    White
    Product Color
    Off-white
    Product Key
    4108
    Shelf Life
    18 Month
    Shelf Life in Months (from date of manufacture)
    18
    Tensile Strength (metric)
    896 Kilopascal
    Total Tape Thickness without Liner (metric)
    3.1 mm
    Product Details
    • Natural, 0.125 in. (3 mm) firm, high-density open-cell foam design helps trap moisture, dust and contaminants
    • Allows air or gas vapors to pass through for a breathable seal
    • Dampens sounds and absorbs vibration when used in electronic applications
    • Excellent cushioning characteristics and high absorbency
    • Offers high initial quick-stick to multiple substrates
    • Provides excellent shear strength and high temperature performance

    3M™ Urethane Foam Tape 4108 is a firm, high-density, open-cell foam tape with a pressure sensitive acrylic adhesive on one side. This tape will adhere to a variety of substrates and can be used in numerous applications to dampen sound and create a clean and durable product.

    Seals Out Moisture, Dust and Drafts
    3M™ Urethane Foam Tape 4108 is 1/8 in. thick, comprised of a firm, high-density, open-cell foam with a pressure sensitive acrylic adhesive on one side. The adhesive is protected by a silicone treated paper liner. It offers excellent cushioning characteristics while allowing air or gas vapors to pass through, while providing high absorbency to seal out moisture, dust and drafts. It can perform under a wide range of temperatures. Special note:  3M™ Urethane Foam Tape 4108 may turn yellow when exposed to light, only affecting its appearance and not physical performance.

    Recommended Applications

    • Cushion and dampen sound in electronics such as printers, keyboards, computers, aircraft lights and automotive dashboards
    • Recessed lighting
    • Door, window and cabinet seals

    Excellent Shear Holding Strength with 3M™ Adhesive 350
    3M™ Urethane Foam Tape 4108 features 3M™ Adhesive 350. This pressure sensitive, modified acrylic adhesive provides high initial quick-stick to a variety of surfaces and substrates. It has an excellent chemical resistant and shear holding strength, even at elevated temperatures. Adhesive 350 is designed to perform at temperatures up to 200°F (93°C) in the short term and 350°F (176°C) long term. 

    Protect Sensitive Components
    The adhesion of 3M™ Single-Coated Foam Tapes is typically satisfactory within 20 minutes and continues to build with additional time. The adhesive is protected by a thick, silicone treated paper liner and has a firm, high-density foam. This design offers an attractive and clean appearance after application. 

    What is Open Cell Foam?
    Open cell foams are commonly used between component panels where a degree of separation is needed to dampen or prevent vibration, as a thermal insulation barrier and to protect against contamination, but where a measure of airflow is still necessary, such as with electronic components where air flow helps keeps components cool.