1. All 3M Products
3M Lebanon
  • 3M™ Novec™ 1700 Electronic Grade Coating
  • 3M™ Novec™ 1700 Electronic Grade Coating

    3M ID 98021229947
    • Easy application and processing - dries in seconds without the need for thermal post-curing
    • Requires little or no masking
    • Allows solder-through repairability and is easily removed for rework & repair
    • Contains no volatile organic compounds (VOCs) and has low global warming potential
     More...
    Product Details

    3M™ Novec™ 1700 Electronic Grade Coating is designed for the protection of printed circuit boards and electronic components. It is a clear, low viscosity solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent.

    Additional Information 3M™ Novec™ 1700 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components. It is a clear, low viscosity, low surface tension solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.

    • Easy application and processing - dries in seconds without the need for thermal post-curing
    • Requires little or no masking
    • Allows solder-through repairability and is easily removed for rework & repair
    • Contains no volatile organic compounds (VOCs) and has low global warming potential
    • Is thermally and electrically stable with excellent dielectric properties
    • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists

    Suggested Applications

    • Electronic Coatings
    • Anti-Stiction
    • Chemical Protection
    • Corrosion Protection
    • Moisture Protection
    Specifications
    Application Category
    Electronic Coatings
    Application Method
    Solution applied by dip, brush, spray or syringe dispense
    Applications
    Anti-Stiction, Chemical Protection, Corrosion Protection, Moisture Protection
    Available Container Sizes
    12 lb (5.4 kg) 1 Gal Container
    Coating Location
    Electronic Device Components
    Coating Thickness (Dip Coated)
    0.1 - 0.2 µm (depending on application method)
    Coverage Area
    Depends on the application
    Dielectric Constant
    3.2 (@1kHz, 30%RH)
    Dielectric Strength (V/mil)
    2000 V/mil
    Dissipation Factor
    0.002 (@1kHz, 30% RH)
    Dry Time
    <2 Minutes
    Net Weight (Metric)
    5.4 kg
    Polymer Type
    Fluoroacrylate
    Product Form
    Liquid
    Product Series
    Novec 1700
    Product Type
    Electrical Coatings, Protecting
    Removability
    Removable with 3M™ Novec™ Engineered Fluid 72DA, 3M™ Novec™ Engineered Fluid 73DE or 3M™ Novec™ Engineered Fluid 7100
    RoHS 2011/65/EU Compliant
    Yes
    RoHS EU Comments
    Yes (including Directive (EU) 2015/863)
    Solids Level
    2 %
    Storage Temperature
    60 °F - 80 °F (16 °C - 27 °C)
    Thermal Cure Time and Temperature
    No need to cure, dries at room temperature
    UV Detectable
    No

    Other 3M Sites:
    Where to Buy (AE)
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    Lebanon - English