1. All 3M Products
3M Lebanon

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1220H

3M ID 70002020306
  • Orange, flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.51 mm thickness
  • Light
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
 More...
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Backing Material
Polyethylene Foam
Backing Thickness (metric)
0.559 mm
Composite Sleeves
No
Industries
Print
NPVI Mktg
No
Overall Length (Metric)
22.86 m
Overall Width (Metric)
457.2 mm
Primary Liner
Polycoated Polyester
Print Quality
Combination Printing - Light
Print Quality (Series)
12 Series
Product Form
Roll
Total Tape Thickness without Liner (metric)
0.56 mm
Urethane Sleeves
Yes
Product Details
  • Orange, flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.51 mm thickness
  • Light
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
  • Securely bonds flexographic photopolymer plates to print sleeves or steel cylinders to prevent plate edge lifting
  • Has higher plate side adhesion for challenging print conditions with thick plates or small print sleeves
  • Cross-hatch pattern from the release liner creates grooves in the adhesive to release air
  • Plate demounts from double coated cushioned tape without adhesive residue
  • Also removes cleanly from the sleeve or steel print cylinder
  • For flexographic printing, flexographic printers
  • Cushioned flexographic plate mounting sticky back foam tape

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1220H. Our 0.51 mm orange, double coated foam tape has the air release feature with high plate side adhesion. It is used for high speed process work.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1220H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality for low density, high speed process work and screen printing. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.

Other 3M Sites:
Where to Buy (AE)
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Lebanon - English