3M™ Dust Remover

Yes. 3M Dust Remover will remove dust and particles from keyboards. ALWAYS hold the can upright to avoid spraying liquid and position the can approximately 2 inches away from the keyboard. Pull trigger in a series of short blasts to remove dust and particles from your keyboard.

No. 3M recommends against using 3M Dust Remover on your motherboard‚ inside your computer or on the inside of any of your electronics‚ because accidental spraying of liquid may damage your electronics. Check with the manufacturer of your electronic equipment for cleaning instructions.

Using long blasts or using short blasts for an extended time will result in a cold can because spraying the product uses energy to evaporate the liquid propellant‚ resulting in cooling. If the can becomes cold to the touch‚ set the 3M Dust Remover aside and allow the can to return to room temperature before continuing use. 3M Dust Remover should be used by pulling the trigger in a series of short blasts. Do not shake or turn the can upside down.

Shaking or tilting the can may cause it to spray liquid. 3M Dust Remover functions properly without the need for shaking. ALWAYS hold the container upright to avoid spraying liquid. Liquid sprayed on skin or in eyes may cause frostbite. Dried liquid spray may leave a bitter residue‚ resulting in a bad taste if transferred to the mouth. To remove dried spray‚ wipe with a cloth dampened with a 50/50 mix of isopropyl alcohol and water. Should liquid spray come into contact with your skin‚ wash the affected area with soap and water. If irritation occurs‚ get medical attention. If liquid spray comes into contact with your eyes‚ flush eyes with large amounts of water. If irritation persists‚ get medical attention.

It depends upon whether your local trash and recycling facilities recycle aerosol cans. 3M recommends that you check with your local trash and recycling companies to determine whether aerosol cans are recyclable in your area. For more information on what is recyclable in your area‚ or where to recycle‚ visit http://earth911.org/. If you are not allowed to recycle aerosol cans in your area‚ you can dispose of the can in the trash after you are sure it is empty. Do not puncture or burn container‚ even when empty.

For an MSDS for 3M Dust Remover AV152A, click here.

To obtain an MSDS of prior formulas of 3M Dust Remover that are no longer sold‚ call 1-888-364-3577.

Bittering agent is an additive that leaves a bitter taste upon contact with one’s mouth. 3M added a bittering agent to 3M Dust Remover to help discourage inhalation abuse. The bittering agent itself is generally not harmful and is used in household cleaners and shampoos to deter intentional or accidental ingestion of these products. However‚ people with asthma or sensitivity to odors or taste may react to the bittering agent‚ and therefore‚ may want to avoid using 3M Dust Remover.

Abuse by inhaling 3M Dust Remover may cause instant death or injury. For more information on inhalant abuse‚ click here.

Dried liquid spray may leave a bitter residue‚ resulting in a bad taste if transferred to the mouth. If you eat a piece of chocolate‚ or drink or eat some dairy products‚ it may help the taste to go away.

Wash affected area with soap and water. If irritation occurs‚ get medical attention. ALWAYS hold container upright to avoid spraying liquid. Dried liquid spray may leave a bitter residue.

To remove dried spray‚ wipe with a cloth dampened with a 50/50 mix of isopropyl alcohol and water. ALWAYS hold container upright to avoid spraying liquid. Dried liquid spray may leave a bitter residue.

Inhalants are household products‚ such as 3M Dust Remover‚ abused to get high. 3M urges consumers to use 3M Dust Remover safely and responsibly by following directions and to avoid intentional inhalation. For more information on inhalant abuse‚ click here.

No. 3M Dust Remover is NOT air in a can. 3M Dust Remover contains difluoroethane‚ ethanol‚ and a bittering agent in the form of a liquefied gas. When you spray 3M Dust Remover‚ this liquefied gas is turned into gas and released through the nozzle. 3M Dust remover is an aerosol product‚ but unlike other aerosol products which propel a liquid or powder (i.e.‚ hair spray‚ cooking spray‚ insecticide‚ etc.) through the nozzle‚ the propellant in 3M Dust Remover is used to propel itself through the nozzle. When used properly and in accordance with the directions on the can‚ this product is completely safe and has proven to be of great value to its users. Abuse by inhaling Dust Remover may cause instant death or injury. If intentional inhalation abuse occurs‚ move the affected person to fresh air and get immediate medical attention. If the person is not breathing‚ administer oxygen and call 911. For more information on compressed gas dusters‚ click here. For more information on inhalant abuse‚ click here.

For most individuals‚ accidentally inhaling small amounts of 3M Dust Remover will not cause any health effects or discomfort. However‚ some individuals may detect an odor with product use. A bitter taste may also accompany this odor. If accidentally inhaled in sufficient quantities‚ 3M Dust Remover can cause respiratory irritation with common symptoms of coughing‚ sneezing‚ hoarseness‚ and mild nose and throat discomfort. These symptoms typically have a short duration and dissipate quickly with fresh air. For select individuals‚ particularly those with pre-existing respiratory conditions (e.g.‚ asthma‚ chronic obstructive pulmonary disease)‚ more severe respiratory effects are possible.

Abuse by inhaling contents may cause instant death or injury. Instant death is known as Sudden Sniffing Death Syndrome (SSDS). Many factors may contribute to SSDS; however‚ cardiac sensitization is generally considered the primary cause. Cardiac sensitization is a condition where the heart becomes overly sensitive to adrenaline resulting in irregular heartbeats and possible heart attacks. SSDS victims may die within seconds. If abusing inhalants does not kill you‚ you may experience other injuries such as nose and throat irritation‚ dizziness‚ headache‚ nausea or unconsciousness. For more information on inhalant abuse‚ click here.

Generic warning signs of inhalant abuse may include: sores around the nose or mouth‚ foul smelling breath‚ complaining of a sore tongue‚ dizziness‚ slurred speech‚ clothes smelling of chemicals‚ and/or the presence of an excessive number of cans of 3M Dust Remover or other products used for inhalant abuse. For more information on inhalant abuse‚ click here.

Yes. 3M Dust Remover is FLAMMABLE. Liquid and vapors may ignite. Do not use 3M Dust Remover while smoking or near open flames‚ pilot lights‚ spark-producing equipment or other ignition sources. DO NOT spray into paper shredders or enclosed spaces. ALWAYS use with adequate ventilation. Avoid heat because the contents are under pressure. The container may BURST and become a PROJECTILE when hot. Store in a cool place‚ at temperatures below 120° F (49°C). Do not expose to heat or prolonged sunlight. Do not store in a vehicle or in any area where the product may become hot. Do not puncture or burn container‚ even when empty.

No. 3M Dust Remover is FLAMMABLE. Liquid and vapors may ignite. Do not use 3M Dust Remover while smoking or near open flames‚ pilot lights‚ spark-producing equipment or other ignition sources. DO NOT spray into paper shredders or enclosed spaces. ALWAYS use with adequate ventilation. Avoid heat because the contents are under pressure. The container may BURST and become a PROJECTILE when hot. Store in a cool place‚ at temperatures below 120° F (49°C). Do not expose to heat or prolonged sunlight. Do not store in a vehicle or in any area where the product may become hot. Do not puncture or burn container‚ even when empty.

No‚ 3M Dust Remover should not be stored in a vehicle or in any area where the product may become hot. Avoid heat because the contents are under pressure. The container may BURST and become a PROJECTILE when hot. Store in a cool place‚ at temperatures below 120°F (49°C). Do not expose to heat or prolonged sunlight. Do not puncture or burn container‚ even when empty.

Because the contents of the can are under pressure. The container may BURST and become a PROJECTILE when hot. Store in a cool place‚ at temperatures below 120°F (49°C). Do not expose to heat or prolonged sunlight. Do not store in a vehicle or any area where the product may become hot. Do not puncture or burn container‚ even when empty.

Liquid sprayed on skin or in eyes may cause frostbite. This results from the cold temperature that accompanies the release of the pressurized contents from the can. For most individuals‚ local discomfort and skin discoloration (i.e.‚ reddening of the skin followed by possible blue/purple coloration and eventual clearing) may result from direct skin contact with 3M Dust Remover. The skin discoloration often resembles a bruise and follows a similar time course for healing. In rare cases‚ severe frostbite may occur that results in severe skin damage that requires medical attention. ALWAYS hold the container upright to avoid spraying liquid. Should liquid spray come into contact with your skin‚ wash the affected area with soap and water. If irritation occurs‚ get medical attention. If liquid spray comes into contact with your eyes‚ flush eyes with large amounts of water. If irritation persists‚ get medical attention.

3M™ Dust Remover Frequently Asked Questions