Because many sleeves are thin and flexible, care must be taken to preserve the sleeve-tape-plate bond.

• Mount the tape while the sleeve is on the mandrel.

• Use minimum air pressure to inflate the sleeve. Too much air pressure causes the bond between the sleeve and tape or the tape and plate to break. Use only enough air pressure to allow the sleeve to slide on and off.

• Keep mounted sleeve tightly wrapped with thin poly film when not in press.

• Sleeve surfaces vary in material type, surface roughness, and surface condition. Extra care and preparation of the surface may be necessary to achieve good bond strength. For example: To increase adhesion, the sleeve surface can be lightly abraded with an emery cloth or sandpaper before adhering the tape.

Plate Mounting Techniques:
DOWNLOAD our complete mounting tips guide (PDF).

NOTE: You will need Adobe Acrobat Reader to view the PDF.