3M Consumer and Office Markets

3M Termination - improved from one end to the other
We took the industry standard for reability and ease-of-use - Our QT-II line and improved both the design and the materials. New 3M™ Cold Shrink™ QT-III Terminations are now smaller, easier to install and more reliable than ever.
Better designs makes them easier to install
Improved High-K stress control system Build-in-High-K stress controlling compound fills the air void at the edge of the cable's semicon layer, eliminating the need to apply silicone grease Built-in silicone sealing compound makes a seal between the termination and the lug, eliminating the need to wrap tape or mastics. Indoor and outdoor version available.
Better materials reduces down-time
New, improved silicone material delivers 4 times better tract and erosion resistance and 4 times faster hydrophobic recovery Improved High-K stress control materials
Smaller Sizes do a big job
2 skirts meet 15kV requirements 4 skirts meet 15kV and 25 kV requirements Non-skirted designs for all equipment terminations.

QT-III Silicone Rubber Termination Kits
Single Conductor
	3M™ Cold Shrink QT-III terminations offer easy installation and reliable perfromance when terminating indoor and out-door medium voltage cable. The uniqe step-core design combined with the built in Hi-K stress control and silicone sealing compound means simpler installation on all types of cable. The QT-III assures long term reliability through an improved silicone rubber body with enhanced hydrophobic recovery.
3M QT-II Outdoor Silicone Rubber Termination Kits (5630K Series)
The 5630K series kits are Class 1 terminations and will accomodate shielded cables, tape, wire and UnitShield ™ from 5kV to 15kV. With an additonal insulator (sold seperately), the 5630K will handle 25 kV and 35kV. Just four kits cover the complete application ranger from 2AWG through 1500 kcmil. Each kit containes enough material to make three terminations.
Cold Shrink™ 5841 and 5842 Sheath Seal Kits
	3M Cold Shrink sheath seal kits 5841 and 5842 are designed to seal the shealth area for three conductor cables without ground wires. They will handle copper or aluminun cable from #2 AWG through 500 kcmil (25-250 mm). No heat is required when using these kits. Each kits contains Molded sheath seal body Instructions
3M QT-II Indoor Silicone Rubber Termination Kits (5620K Series)
	The 5620K series terminations are one piece, non-skirted Cold Shrink rubber designed specifically for shielded cables, tape, wire and UniShield™ from5kV to 15kV indoor applications. Just five kits cover the complete applications range from 8 AWG to 1500 kcmil. The cold Shrink delivery system of the 5620K series requires no torches or heat. You simply unwind the core and the termination shrinks tight. The series also features a mechanical groundstrap. There's no soldering and no worries about heat related cable damage.