ThistleBond Osmotic Repair Systems

ThistleBond products are safe, easy-to-use and due to the their simple packaging and indefinite storage life, they can be used anytime, anywhere to rebuild and repair worn or damaged machinery and equipment operating in aggressive industrial environments.

Numerous independent tests have shown that the ThistleBond products in this range have no equal anywhere in the world. Through our international network of agents and distributors, we are able to offer instant, on the spot advice for any engineering repair or maintenance problem - without obligation.

This advice comprises information on mechanical strengths, chemical resistance, recommended surface preparation and full working system recommendations.

Our aim is to provide ThistleBond customers with a range of engineering repair and maintenance products, which are cost-effective, environmentally friendly and offer outstanding performance.

Product	Application Guide	Product Manual	Tech Info
TL 500 152 SFE (C)	High performance solvent free epoxy for OSMOSIS prevention on GRP hulls and structures operating under continuous immersion.	Click Here	Click Here
TL 501 152 SFE (C)	High performance solvent free epoxy for OSMOSIS prevention on GRP hulls and structures operating under continuous immersion.	Click Here	-
TL 505 Low Viscosity MP Primer (C)	Low viscosity solvent free epoxy primer for timber surfaces and laying up fibreglass.	Click Here	Click Here
TL 520 MA3 Tie-Coat (C)	High flash primer/tie coat for steel, galvanised steel, aluminium, GRP, wood and phenolic surfaces. Application by brush, roller or spray.	-	Click Here
TL 535 Polyurethane Finish (C)	High performance two component polyurethane finish with excellent gloss and colour retention for use over MA3 or MA9 Tie-Coats. Application by brush, roller or spray.	Click Here	Click Here
TL 540 Phenolic Surfacer (C)	Fast drying filler/surfacer for GRP and phenolic surfaces prior to application of MA3 or MA9 Tie-Coats to prevent pinholing.	-	Click Here
TL 545 MGF Surfacer (C)	Fast curing epoxy filler with good sanding properties for fairing up imperfections in GRP surfaces or large areas where gel coat has blown.	-	Click Here