1. All 3M Products
  • 3M™ All Weather Flashing Tape 8067 Tan, 12 in x 75 ft Slit Liner, 4 rolls per case
  • 3M™ All Weather Flashing Tape 8067 Tan, 12 in x 75 ft Slit Liner, 4 rolls per case

    3M ID 700067450073M Product Number 8067UPC 00051115642401
    • Apply at surface temperatures as low as 0°F (-18°C) or high as 176°F (80°C)
    • Resists UV exposure for up to 12 months
    • Passes nail sealability before and after thermal cycling according to AAMA 711-05
    • Bonds to most common building materials without primers and staples
     More...
    Typical Properties
    Attribute Name
    Value
    Adhesion Strength
    60 oz/in
    Adhesion Strength (metric)
    66 N/100mm
    Adhesive Type
    Acrylic
    Applications
    Air Barrier, Flashing Windows & Doors
    Backing Material
    Proprietary film
    Backing Thickness
    5 mil
    Backing Thickness (metric)
    0.13 mm
    Brand
    3M
    Color
    Tan
    Industries
    Construction
    Length
    75 Linear Foot
    Length (Metric)
    22.86 m
    Maximum Operating Temperature (Celsius)
    80 Degree Celsius
    Maximum Operating Temperature (Fahrenheit)
    176 Degree Fahrenheit
    Minimum Operating Temperature (Fahrenheit)
    -40 Degree Fahrenheit
    Primary Liner
    Heavy Paper Split
    Product Form
    Roll
    Shelf Life in Months (from date of manufacture)
    24
    Tape Thickness
    9.9 Milli-inch (mil)
    Thickness
    9.9 mil
    Thickness (Metric)
    0.25 mm
    Volatile Organic Compounds (VOCs)
    See Safety Data Sheet, Regulatory Data Sheet
    Width
    12 Inch
    Width (Metric)
    304.8 mm
    Details
    • Apply at surface temperatures as low as 0°F (-18°C) or high as 176°F (80°C)
    • Resists UV exposure for up to 12 months
    • Passes nail sealability before and after thermal cycling according to AAMA 711-05
    • Bonds to most common building materials without primers and staples
    • Service temperature -40ºF to 240ºF (-40ºC to 116ºC)
    • No adverse reaction with many building sealants
    • Split-liner for easy and accurate positioning of tape, especially long lengths
    • Eligible for LEED Compliance Credits

    3M™ All Weather Flashing Tape 8067 is a self-adhered, waterproof flashing membrane designed for sealing around openings and penetrations in exterior walls. This product has a unique acrylic pressure sensitive adhesive that aggressively sticks and stays stuck both at lower and higher application temperatures than traditional flashing tapes. It even adheres to damp surfaces.

    3M™ All Weather Flashing Tape 8067
    Available in a variety of widths to meet your project needs
    Bonds to Most Common Building Materials without Primers and Staples
    3M™ All Weather Flashing Tape 8067 (PDF, 193.6 Kb) is engineered to increase productivity while solving the most critical flashing problems. Unique acrylic pressure sensitive adhesive sticks and stays stuck to seal around windows, doors and other openings. To prevent moisture intrusion, the thin backing construction effectively conforms and seals around nails and staples with less buildup under siding. Proprietary construction will not liquefy, bleed, or melt in contact with many building sealants or in extreme summer temperatures.

    Recommended Applications
    • Sealing joints around sills, jambs and heads of rectangular windows in wood frame construction
    • Sealing around other wall interruptions in non-roof areas, such as thresholds, dryer vents and hose bibs
    • When installed properly as a concealed flashing in vertical walls in frame construction, it prevents moisture intrusion or water leaks and avoids the costly problems caused by water infiltration
    Stays Stuck, Even in Extreme Temperatures
    3M™ All Weather Flashing Tape 8067 (PDF, 258.5 Kb) resists UV exposure for up to 12 months. It can be applied to materials without primers or staples and bonds in surface temperatures from 0° to 176°F (-18° to 80°C) per AMAA 711-05. Its proprietary backing seals around nails and staples to prevent moisture intrusion. This backing is also tough, resists punctures and tears, yet it is thin to fit conveniently into corners and under siding. The split paper release liner provides fast application with easy and accurate positioning of the tape.

    Click here for more information on 3M Masking and Surface Protection Products (PDF, 4.65 Mb)


    Customer Reviews
    3M™ All Weather Flashing Tape 8067 Tan, 12 in x 75 ft Slit Liner, 4 rolls per case is rated 5.0 out of 5 by 1.
    Rated 5 out of 5 by from Quality tape We are a northern California contractor using your tape. We go thru about 30 cases a month for use in the stucco repair industry. This product I highly recommend to seal all joint in EPS foam used in one coat stucco systems. I recommend in your brochures to remind them to use a roller to insure no fish mouthing, and bubbling.
    Date published: 2015-10-15
    • y_2017, m_8, d_14, h_7
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_70006745007|3m-country-catalog|FUZEexperience|en_US, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_3m-country-catalog
    • bvseo_sdk, java_sdk, bvseo-3.2.0
    • CLOUD, getContent, 147ms
    • REVIEWS, PRODUCT
    Large Volume Order

    If you are considering a large purchase of this or other 3M Industrial Adhesives and Tape products, our inside sales team is ready to help by providing additional information and options. Our technical expertise, customer support, and global capabilities put us in a unique position to address your biggest challenges, and we’ll do our best to prove that we should be your supplier of choice.


    All fields are required unless indicated optional

    • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.

      Please be aware that this information (including the original and the subsequent reply) may be transferred to a server located in the U.S. for metrics and storage. If you do not consent to this use of your personal information, please do not use this system.

    • Submit