1. All 3M Products

3M™ Scotchkote™ Pipe Renewal Liner 2400 Pt B, Activator, 12L, Grey

3M ID GR200134959
  • Prevent corrosion and tuberculation
  • Restore and maintain internal pipe diameter
  • Repair cracks, pin holes and corrosion pitting
 More...
Typical Properties
  • Application Method
    Plural feed hot airless spray
  • Applications
    In-situ pipe coating
  • Application Thickness
    1.2 to 8mm dependent upon requirements, pipe diameter and bury depth - consult 3M Design and Installation Guide
  • Container Volume (metric)
    12
  • Coverage Area
    1 sq Metre per Litre at 1mm dft
  • Drinking Water Approvals
    Reg 31(4)a
  • Full Cure Time Temperature Time
    60 second gel, 10 minute cure (CCTV), 60 minute total cure, 30 minute flush
  • Industry Solutions
    Rehabilitating Potable Water Infrastructure
  • Material
    Polyurea
  • Mixed Color
    Gray
  • Mix Ratio
    1:1 (Part A:Part B)
  • Operating Temperature (Celsius)
    Ambient
  • Product Family
    Scotchkote Liner 2400
  • Product Form
    Liquid
  • Product Type
    Polyurea
  • Recommended Application
    Pipes
  • Recommended Surfaces
    Ductile iron, cast iron, cement mortar, PVC, asbestos
  • RoHS 2011/65/EU Compliant
    Undetermined
  • RoHS EU Comments
    Contact 3M for information
    *Important RoHS information
  • Shelf Life
    15 Month
  • Storage Temperature
    5 to 32 Degree Celsius
  • Used With
    Potable Water (select countries and uses)
  • Volume (metric)
    12 L
Product Details
  • Prevent corrosion and tuberculation
  • Restore and maintain internal pipe diameter
  • Repair cracks, pin holes and corrosion pitting

Scotchkote Liner 2400 helps improve water quality and service life in existing potable water pipes. The quick curing polyurea formulation allows lined sections to be returned to service 90 minutes after application. It is a trenchless solution, spray applied using a spin cast method, avoiding much of the cost and community impacts of full pipe replacement.

3M™ Scotchkote™ Pipe Renewal Liner 2400 helps provide a cost effective solution to many of the problems common to potable water distribution systems. Its unique properties, combined with a trenchless spin cast application process, can efficiently coat the existing infrastructure—helping to restore internal pipe diameters, increasing flow, improving efficiency, minimizing water loss and helping to prevent additional corrosion and tuberculation. Scotchkote™ Liner 2400 offers a 10 minute set time and 60 minute cure followed by a 30 minute flush. The ability to reinstate a water main within 90 minutes of lining allows for same day return to service—reducing total cost, shortening construction schedules and minimizing disruptions to water customers, traffic and local businesses. Use for the rehabilitation of ductile, cast-iron or cement mortar lined ductile or cast iron drinking water mains between 4" (100mm) and 24" (610mm) in diameter.

Scotchkote Liner 2400 is NSF/ANSI-61 certified and approved for contact with drinking water in countries in North America, Asia and Europe. It is 100% solids and contains no epoxy resin.

Scotchkote Liner 2400 is applied exclusively by 3M Authorized Applicators using certified application equipment for trenchless rehabilitation of potable water pipes.

Resources
Follow Us
The brands listed above are trademarks of 3M.