Scotchgard™ Ultra Durable Floor Finish Remover Concentrate is a specially formulated heavy duty floor finish stripper intended to enhance efficiency and effectiveness when removing (stripping) Scotchgard™ Ultra Durable Floor Finish from a floor.
Shake container prior to mixing. Fill mop bucket with the appropriate amount of cold water to meet your desired dilution. 1) Removing 1 coat of Scotchgard™ Ultra Durable Floor Finish mix 1 to 2 (one quart concentrate to two quarts cold water). 2) Removing 2 coats of Scotchgard™ Ultra Durable Floor Finish mix 1 to 1 (one quart concentrate to 1 quart cold water). Using floor mop to agitate solution rigorously in mop bucket. Guideline – one gallon of ready-to-use floor stripper will cover 150 square feet. Dust area using 3M™ Easy Trap Duster. Tape off areas to minimize splashing and creating additional clean-up. Apply generously with conventional floor mop. Allow 20 minute dwell time. Keep area wet during dwell time by adding additional solution as needed. Use squeegee and dust pan to collect released floor finish film and place in trash can liner. Flood rinse floor with cold water. Inspect dried floor for remaining floor finish and remove with hand scraper. Dust area using 3M™ Easy Trap Duster. Second rinse using wet vac or auotscrub for pick-up.